|
| millard455 |
|
|||
|
hi all,
my original fuel pump cradle had this black rubber/foam type sleeve that the pump sat in too hold it in the cradle nice and tight, was a perfect fit for a walbro pump. does anyone know the bit im talking about? just trying to figure out if my cradle has been modified or if this sleeve is a stock ford part. i forgot to add that this is for the later plastic style cradle not the metal one. thanks heaps.
_________________ EL XR8 SERIES 2, 5SPD, HOT CHILLI RED, 200 ODD RWKW OF V8 FUN AND GAMES Last edited by millard455 on Mon Apr 27, 2009 11:17 pm, edited 1 time in total. |
|||
| Top | |
|||
| kevman |
|
||
|
I have changed a few fuel pumps and some do have the foam boot over them and if the aftermarket one that I fit doesn't have it then I just swap it over.Cheers Kevman
|
||
| Top | |
||
| millard455 |
|
|||
|
kevman wrote: I have changed a few fuel pumps and some do have the foam boot over them and if the aftermarket one that I fit doesn't have it then I just swap it over.Cheers Kevman the problem is mine is stuffed and im trying to find a replacment so i can install my walbro pump but the wrecker i spoke to didnt know what i was talking about, said he had a few cradles there but none of them had this sleeve so i started to think it wasnt a stock part. does anyone know where i would get one of these boot/sleeve things?
_________________ EL XR8 SERIES 2, 5SPD, HOT CHILLI RED, 200 ODD RWKW OF V8 FUN AND GAMES |
|||
| Top | |
|||
| twr7cx |
|
|||
|
millard455 wrote: does anyone know where i would get one of these boot/sleeve things? Have you tried Fraud spare parts? As I'm very sure it's a stock part, and they'll be able to give you a definite answer. |
|||
| Top | |
|||
| xr6eat 50 |
|
|||
|
Try a local plumbing supplier, it is called "Armor Flex" they use it to insulate copper refrigeration pipe aswell. you might even score it for free if you are lucky.
_________________ EF XR6 Manual 271RWHP/199RWKW N/A using Stock manifold with dual plane runners still operating. EFI Hardware 6TBM to come mid year. Last edited by xr6eat 50 on Tue Apr 28, 2009 9:28 pm, edited 1 time in total. |
|||
| Top | |
|||
| millard455 |
|
|||
|
twr7cx wrote: millard455 wrote: does anyone know where i would get one of these boot/sleeve things? Have you tried Fraud spare parts? As I'm very sure it's a stock part, and they'll be able to give you a definite answer. yeah tried ford but it is an obsolete part now so no luck there.
_________________ EL XR8 SERIES 2, 5SPD, HOT CHILLI RED, 200 ODD RWKW OF V8 FUN AND GAMES |
|||
| Top | |
|||
| millard455 |
|
|||
|
xr6eat 50 wrote: Try a local plumbing supplier, it is called "Armor Felx" they use it to insulate copper refrigeration pipe aswell. you might even score it for free if you are lucky. thanks heaps for that mate  , ill give a few places a ring tomorow and see how i go.
_________________ EL XR8 SERIES 2, 5SPD, HOT CHILLI RED, 200 ODD RWKW OF V8 FUN AND GAMES |
|||
| Top | |
|||
| twr7cx |
|
|||
|
If you get desperate, contact CAPA, the fuel pump that they supplied me came with 1, they might be able to supply them seperatelly. Or contact some fuel pump companies like Fuelmiser and ask them.
|
|||
| Top | |
|||
| snap0964 |
|
|||
|
Other than reducing the noise of the motor through direct contact with metal, I wonder if that boot serves any other purpose.
You might get away with some heatshrink tube and cable ties - they should be okay in petrol. xr6eat 50 wrote: Try a local plumbing supplier, it is called "Armor Flex" they use it to insulate copper refrigeration pipe aswell. you might even score it for free if you are lucky. If this is the stuff I'm thinking of - make sure it won't go to pieces in petrol over time.
_________________ 96 XH Longreach 'S': LPG, Alarm, 3.23:1 LSD, Cruise, Trip Comp, ABS, Power Windows, Mid Series Dome Lt, Climate Ctrl |
|||
| Top | |
|||
| xr6eat 50 |
|
|||
|
If it is Armor Flex it will be fine. It is a foam rubber not a polly foam fuel and oils wont fase it.
_________________ EF XR6 Manual 271RWHP/199RWKW N/A using Stock manifold with dual plane runners still operating. EFI Hardware 6TBM to come mid year. |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 17 guests |
