|
| ea_monty |
|
|||
|
hi i'm just woundering if anyone has the bin codes for the ECU chip in the e-series range. i need them for an el auto ECU so i can change the bin code on the eprom (spelling my be wrong) chip so i can run it with a manual so i don't have to do an auto bypass. thanks
|
|||
| Top | |
|||
| gogetta |
|
|||
|
how are u planning on doing this?
_________________ |
|||
| Top | |
|||
| ea_monty |
|
|||
|
my girlfriends dad is an electronics technition and he has done this type of coding before but he needs the eprom bin codes for a manual chip so he can use his eprom chip burning program to recalibrate/reprogram the ECU chip so it'll be a manual ECU. or he'll just pullapart my manual ECU and the EL AUTO ECU and get the eprom chip and put it into the EL AUTO ECU so i can run the EL BBM manifold in my EA with the AU motor and T5 Manual. any help on where to find the bin codes would be a great help thanks
|
|||
| Top | |
|||
| frankieh |
|
|||
|
||||
| Top | |
|||
| gogetta |
|
|||
|
do a search for j3 moates on this forum
i think u will find it impossible to do it they way u are intending... problem is (I think) that the ECU does not contain an EPROM, instead it is a proprietary chip that cannot be purchased or re-writen...in stead u need to use the J3 port on the ECU instead
_________________ |
|||
| Top | |
|||
| ea_monty |
|
|||
|
thanks frankieh thats exactly what he needs thanks for your help i'll let you know how he goes with it
|
|||
| Top | |
|||
| gogetta |
|
|||
|
would be good if u manage to get things working..
there are a few people trying to do this at the moment...up until now uve only been able to do it through chiptorque etc.. let us know how u go with it..
_________________ |
|||
| Top | |
|||
| frankieh |
|
|||
|
I'd be happy with using the J3...
put a manual XR6 bin on it, and then edit the AFR's to suit my M90... fun.. |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 16 guests |
