|
| hales231271 |
|
|||
|
Just picked up a complete LPG system for the wagon.
It is very detailed , seperate ecu and a factory gas loom that is very detailed. Air induction has a Rubber valve for backfire and air box has spring clips on it. Basically I think ford installed the loom as the car was going down the assembly line. Does anyone know where the LPG ecu mounts?? I think mabey under the body control module but I am not 100% sure. The problem I have now is that I really need a wirring diagram for the factory LPG system. Can anyone please help me on this one?? Cheers Dazza |
|||
| Top | |
|||
| Disco Frank |
|
|||
|
maybe ford or even a the ford workshop manaul
and the ecu i think is actually under the drivers seat!
_________________ RIP SCOTT |
|||
| Top | |
|||
| Happy |
|
|||
|
what model car ?
_________________ Owning 1 of 67612 EF GLi Sedans made
|
|||
| Top | |
|||
| Shum's EL |
|
|||
|
wiring diagram - i'd go see wat ford can do for ya..
and as for the ecu.. i have factory tickfor gas on my EL and the LPG ecu is mounted under the drivers side of the dash beside the steering column.. above ya clutch foot (or the sit around and do nothing foot for auto drivers  )
|
|||
| Top | |
|||
| hales231271 |
|
|||
|
Quote: what model car ?
Sorry it's a EF XR6 wagon. I will try Ford and see if I have any luck. Tickford never released LPG on the XR6. Why is this?? I hope there shouldn't be any issues with my ECU. If not I will have to swap out the ECU for a stocky. Cheers Dazza |
|||
| Top | |
|||
| twase |
|
|||
|
hales231271 wrote: Just picked up a complete LPG system for the wagon. There are two ways to wire it up, if its from factory then there will be 3 wires which head over to the ECU which tell the ECU to cut the injectors, use a different timing map and different Auto shift points when on LPG. This requires the LPG version of the ECU. If you did not get the dual fuel car ECU then you can wire it up without this. You need to use the relay output of the LPG controller to cut the Injectors. Go to any LPG installer and ask if you can get a copy of the wiring diagram, there is one for the dual fuel factory install and one for the aftermarket install without the Dual Fuel Car ECU. If you fail there then talk to Boral, they are the local suppliers and can supply the manual at a resonable cost.
It is very detailed , seperate ecu and a factory gas loom that is very detailed. Air induction has a Rubber valve for backfire and air box has spring clips on it. Basically I think ford installed the loom as the car was going down the assembly line. Does anyone know where the LPG ecu mounts?? I think mabey under the body control module but I am not 100% sure. The problem I have now is that I really need a wirring diagram for the factory LPG system. Can anyone please help me on this one?? Cheers Dazza
_________________ BF Fairmont Ghia Series II update. |
|||
| Top | |
|||
| hales231271 |
|
|||
|
I can get the LPG ecu from the place I got the Gas Kit no problems.
Do you think I should do this or keep the XR6 ecu?? If I change the ecu to the LPG ecu will it still run the T motor fine?? Will I have to change the fuel pressure reg to a stocky??? You help has been great. I suppose I should not put a XR6 motor on gas but the way Fuel price is going and that it's the wife's shopping trolly I am not to concerned. Cheers Dazza |
|||
| Top | |
|||
| pearcejm@kooee.com.au |
|
||
|
Hi .Doing the same instal as you.Have you tracked down the wiring diagrams yet.I have been trying to find them for months but no success yet.Please get in touch if you get them.Where did you get the lpg switch from and are the wires that it plugs into the blank ones behind the fuel switch.
thanks john |
||
| Top | |
||
| hans hartman |
|
||
|
pearcejm@kooee.com.au wrote: Hi .Doing the same instal as you.Have you tracked down the wiring diagrams yet.I have been trying to find them for months but no success yet.Please get in touch if you get them.Where did you get the lpg switch from and are the wires that it plugs into the blank ones behind the fuel switch. i have a vn comm. fitted with a viale computerised gas system,the agents for it are BORAL--GREYSTANES,SYDNEY,i drove up to talk to them about my system--not to many agents around.i saw 3 bays with fords being fitted and stripped,they had a ford contract a bout 7-8 years ago to supply the assembly line,try them.i talked gas with foreman for 4hrs and tested and explained the sysrem to me--the cost ---free! thanks john 
_________________ R.I.P HANS HARTMAN |
||
| Top | |
||
| V8R |
|
||
|
just came across this post, i have the factory installers manual here somewhere, if youre still after this, guys.
|
||
| Top | |
||
| Shum's EL |
|
|||
|
V8R wrote: just came across this post, i have the factory installers manual here somewhere, if youre still after this, guys.
thread mining hey??? |
|||
| Top | |
|||
| Plankman |
|
|||
|
|
|||
| Top | |
|||
| Shen Long |
|
|||
Age: 49 Posts: 391 Joined: 22nd Aug 2008 Ride: 2002 AUII Fairlane Sportsman V8 Location: Roxby Downs |
hales231271 wrote: Just picked up a complete LPG system for the wagon. It is very detailed , seperate ecu and a factory gas loom that is very detailed. Air induction has a Rubber valve for backfire and air box has spring clips on it. Basically I think ford installed the loom as the car was going down the assembly line. Does anyone know where the LPG ecu mounts?? I think mabey under the body control module but I am not 100% sure. The problem I have now is that I really need a wirring diagram for the factory LPG system. Can anyone please help me on this one?? Cheers Dazza On the top part of the floor, near/behind the BCM |
|||
| Top | |
|||
| Mad2 |
|
|||
|
Shen Long wrote: hales231271 wrote: Just picked up a complete LPG system for the wagon. It is very detailed , seperate ecu and a factory gas loom that is very detailed. Air induction has a Rubber valve for backfire and air box has spring clips on it. Basically I think ford installed the loom as the car was going down the assembly line. Does anyone know where the LPG ecu mounts?? I think mabey under the body control module but I am not 100% sure. The problem I have now is that I really need a wirring diagram for the factory LPG system. Can anyone please help me on this one?? Cheers Dazza On the top part of the floor, near/behind the BCM good thread mine 
|
|||
| Top | |
|||
| Shen Long |
|
|||
Age: 49 Posts: 391 Joined: 22nd Aug 2008 Ride: 2002 AUII Fairlane Sportsman V8 Location: Roxby Downs |
Mad2 wrote: Shen Long wrote: hales231271 wrote: Just picked up a complete LPG system for the wagon. It is very detailed , seperate ecu and a factory gas loom that is very detailed. Air induction has a Rubber valve for backfire and air box has spring clips on it. Basically I think ford installed the loom as the car was going down the assembly line. Does anyone know where the LPG ecu mounts?? I think mabey under the body control module but I am not 100% sure. The problem I have now is that I really need a wirring diagram for the factory LPG system. Can anyone please help me on this one?? Cheers Dazza On the top part of the floor, near/behind the BCM good thread mine My apologies mate, was hastily replying to threads LOL |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 5 guests |
