You can forget JMM.

You can forget chiptorque sunbury.

Bullet Performance Racing located in waurn ponds, geelong, is the way to go. They can tune sct/capa flash, moates/J3, capa eliminator, sniper and more that I cant remember off the top of my head. One of the ones he mentioned was real time on the fly engine tuning as you drive... cant remember the name, only been trialed on the V8's.

Matthew is the go to guy, a qualified auto elec, and technition for ford. He has the info on so much to do with ECUs and tuning, and he is on good terms with Jason from TI performance, they regularly help each other out with tuning solutions.

BPR is trying to get up off the ground currently, and Im very glad to be sort of a test customer for mat, as he is a very down to earth and honest guy. I got my auto ECU flashed to manual spec, had the rev limiter raised to 5700 rpm, had the speed restrictor lifted, and the tickford police performance maps uploaded in place of the factory tune, all for $220. I cant believe how far mat goes out of his way for his customers. I actually forgot to take my SCT flash unit with me (at least i remembered to take the auto ecu) so he flashed my ecu with his unit, which he now has to go and get unlocked as it is vin locked to my cars ID, all because Im an idiot. I went home once we were happy with the tune and got my flash unit and we uploaded the tune onto it.

If your doing a manual conversion on your AU, dont bother with a manual ecu, as you will have to have it coded to your ignition anyway. Take it to mat and he will have your auto one running the manual better than the e-series resistor trick, which by the way cannot be done to au ecu's.

When my cam finally goes in one day I know where Ill be going to get the custom tune done. Bullet Performance Racing for sure. Best service and best prices, So glad I found this place that I had to share it with you guys.

do they have a website? where abouts in warne ponds are they?

http://www.bulletperformanceracing.com.au/

he is located not far from deakin uni. at the round about where the roadworks are you go off to the left. the new bypass made getting there a piece of piss from here in the marsh. He can do ecu mods, and upgrades from home, and If you need custom tune, matt will do the tuning on Dalton automitives dyno http://www.daltonautomotive.com/

Never knew about these guys, only about Daltons, sounds like it's worth checking out.

Yeah its a good operation - I used them and cant fault them

You get Matt from Bullet who is the Tuner and Chris from Dalton who is the owner of the Dyno help tune your car with both their years and years of experience

Matt owns and races a Bseries and also has an FGXR6 Turbo ute which he has tuned with awesome reults
Chris owns and races Series 6 RX7 dragcar - its a weapon on the 1/4 mile

Hopefully going back soon to get a re-tune of my J3 Chip after as i have done a few more mods to my car

I cant say a bad thing about Chris he install and tuned my microtech for me. Pritty reasonably pricew to. I am nearly ready to head back there for a proper tune and get some real power out of my old girl.