Fordmods Logo

keyless entry problems, not working, need new remote 

 

Page 1 of 1 [ 3 posts ] 

 
 Post subject: keyless entry problems, not working, need new remote
Posted: Sun Jun 08, 2008 8:07 pm 
Fordmods Newbie
Offline

Age: 29

Posts: 18

Joined: 20th Jan 2008

Ride: EL Fairmont

Location: Mount Gambier
SA, Australia

whats up guys?

well my remote for my keyless entry is nackered, the boot button works but the button wont work. opened it up and its completely stuffed.

im gonna need a new one but not keen on spending 100 bucks at ford lol

ebay is looking the go :P

my question is how do i set/program the remote for my car? ive heard stories bout placing the remote next to something inside the car and pushing each button will set/program it but not sure???

its a EL Fairmont.

cheers guys
Top
 Profile  
 
 
Posted: Sat Sep 27, 2008 10:40 pm 
Oompa Loompa
Offline

Age: 26

Posts: 28

Joined: 25th Sep 2008

Ride: fairmont

Location: melbs
VIC, Australia

can someone plzzz help i have the same problem...
Top
 Profile  
 
 
Posted: Sat Sep 27, 2008 10:49 pm 
Getting Side Ways
Offline
User avatar

Age: 27

Posts: 1998

Joined: 31st Dec 2007

Gallery: 9 images

Ride: xc wag's, tnklane wag's

Location: Munruben
QLD, Australia

Quote:
Adding and Removing remote Keypads to the Smartlock module
Up to four Keypads can be programmed and used with the Smartlock Remote Central locking system.
If you have replaced the BEM, or new keypads are being added to the system, you will need to train the keypad codes to the module.
# 1. The ignition switch should be in the Off position, with all the doors shut and Unlocked.
# 2. Turn the ignition key to the ACCESSORY position and within 5 seconds, operates the rear demister switch exactly three times in quick succession. (IE. Press the switch so the Demister light turns on, then off, then back on again.)
# 3. After the 5 seconds is up, the door locks will change state, to indicate that the BEM has entered keypad learn mode.
NOTE : All existing keypads at this point, have been erased from memory !
# 4. Press either buttons on the keypad that is to be trained. The door locks will change state twice, to indicate that the keypad has been added to the BEM memory.
# 5. Follow step 4. for each keypad that is to be added to the BEM memory. A maximum of 4 keypads can be added to the BEM memory.NOTE : You must teach all remote keypads for the Smartlock module, before proceeding.
# 6. When you have taught all the remote keypads, turn the ignition to the Off position to leave the learn mode. The door locks will change state to indicate a return to normal mode.
# 7. Check the function of both buttons on each keypad, to ensure that the keypad has been trained.


read some tech docs, or try a search next time as either should've netted you results.

link

 

_________________

Signature removed by moderator.signature must not exceed 120x500 pixles

Top
 Profile  
 
Display posts from previous:
Sort by  
 Page 1 of 1  [ 3 posts ] 

Who is online

Users browsing this forum: No registered users and 13 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Sat Dec 16, 2017 2:41 pm All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names