hey guys, i recently brought a microtech mt-8 computer with harnes and base map for a ford 4ltr, as all the guy done was cut the loom and didnt mark anything, i downloaded the wirring diagram, it all looks straight forward, its just the injector side that cant work out, with the diagram i downloaded there is four main wires a yellow - orange - orange/black - yellow/black each one looks as tho it works in banks of two injectors, has anyone worked with a mt8 before got any tips would be very much appreciated.

if there are 4 wires for injectors then im pretty sure your correct in that you will need to run 3 banks for sets of 2 injectors. it was in another thread the other day about which injectors to pair up.

Contact microtech directly. They will gladly help you.

Do it properly...or otherwise you may over load the injector driver,....and damage the ecu.

Here is there details

Technical Support:
tech@microtechefi.com
Phone: +61 249661232
Fax: +61 249661022