|
| Darcy4524 |
|
||
|
How do I check my fuel pump in my na fairlane I couldnt get the giant hose clamp off so I just pried it off but how do I do the rest ive tried using a screwdriver and hammer but no luck. Should I just persevere or try to find the tool needed?Also what is the hose clamp for?
_________________ NA2 fairlane - 3.9 with au headgasket & injectors, ef fans, 2.5" zorst, lowered on selby springs , kenwood head unit and 6 speakers, fusion sub, el ecu & ti chip |
||
| Top | |
||
| SWC |
|
||
|
Use a Hammer and a screwdiver and you will f**k the Ring. Borrow tthe correct tool and it is easy.
The clamp is to stop the plastic from expanding, nothing else. I just put a new Walbro in mine and used the correct tool. Bit tight getting off but never touched the clamp. Before you screw the ring back on wipe the threads with heaps of Vasaline, makes it so much easier to screw on and lock down. Ensure the big O ring is in good nick and properly located before you install the pump. |
||
| Top | |
||
| Darcy4524 |
|
||
|
Where can I get the tool?
_________________ NA2 fairlane - 3.9 with au headgasket & injectors, ef fans, 2.5" zorst, lowered on selby springs , kenwood head unit and 6 speakers, fusion sub, el ecu & ti chip |
||
| Top | |
||
| bry40l |
|
|||
|
Darcy4524 wrote: Where can I get the tool? Attachment: fuelpumptool.jpg or you can purchase them off ebay if you can wait for it, try calling your local repco/bursons aswell
_________________ BF XR6 |
|||
| Top | |
|||
| Darcy4524 |
|
||
|
Will do if they dont have one ill make one in my metals class
_________________ NA2 fairlane - 3.9 with au headgasket & injectors, ef fans, 2.5" zorst, lowered on selby springs , kenwood head unit and 6 speakers, fusion sub, el ecu & ti chip |
||
| Top | |
||
| Darcy4524 |
|
||
|
Bursons is ordering one for me
_________________ NA2 fairlane - 3.9 with au headgasket & injectors, ef fans, 2.5" zorst, lowered on selby springs , kenwood head unit and 6 speakers, fusion sub, el ecu & ti chip |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 12 guests |
