Fordmods Logo

The Illustrated Guide to AU & B-Series I6 TMAP Sensors 

 

Page 2 of 3 [ 31 posts ] Go to page Previous  1, 2, 3  Next

 
 Post subject: Re: The Illustrated Guide to AU & B-Series I6 TMAP Sensors
Posted: Sat Dec 01, 2012 1:14 pm 
Tyre Shredder
Offline

Age: 55

Posts: 373

Joined: 9th Feb 2006

Ride: AU Wagon

Location: Newcastle
NSW, Australia

TROYMAN wrote:
im not 100% as i havent physically tried it, but it almost looks like the series 1 au map plug could fit ba xr6t map???
ill find out soon enough...


You'll be disappointed... it doesn't fit. You'll either need to cut & solder or get access to a high-precision crimper and a M/F pair of waterproof connectors to make up an adapter harness. It's roughly the same size and shape but, from memory, one plug has square corners and the other has rounded or something.

Put it this way... if the AU1 plug just plugged straight into the XR6T TMAP, I would have deemed it worthy of mention at the start of this thread... in bold, red, 72-point caps :D Unfortunately the AU1 proves to be an orphan yet again :( or a bastard child...

Has there been some development put into AU defs since Rob Herrod took over SCT distribution from CAPA? Last time I updated and ran Advantage 3 (PRP) the WANA def was still braindead.

 

_________________

AU1.5 Wagon, Raptor ProStreet kit, Pacemaker 4499's with 3" collector, 3" metal cat, 3" pipe, Pex BSO660 & BSO439, BA brakes, Sprintgas mixer LPG system, Airod variable-venturi mixer... stealth FTW Sniper tuned!

To be updated... soon!

Top
 Profile  
 
 
 Post subject: Re: The Illustrated Guide to AU & B-Series I6 TMAP Sensors
Posted: Sat Dec 01, 2012 6:14 pm 
Moderator
Offline

Posts: 14513

Joined: 7th Nov 2004

Ride: ford falcon au3 xr8

Location: a shit suburb in sydney
NSW, Australia

yea i just had mine apart and the au1 plug is different, but i have a fg n/a plug that im wiring into the au1 loom now...
Top
 Profile  
 
 
 Post subject: Re: The Illustrated Guide to AU & B-Series I6 TMAP Sensors
Posted: Sat Dec 01, 2012 6:27 pm 
Tyre Shredder
Offline

Age: 55

Posts: 373

Joined: 9th Feb 2006

Ride: AU Wagon

Location: Newcastle
NSW, Australia

TROYMAN wrote:
fg n/a plug is the same as the ba xr6t plug.
and fg turbo has a different map and plug to above..


That's good info Troy, worth highlighting IMHO. An FG plug from a wrecker should be heaps cheaper than a new plug from CAPA, or the $300 I was quoted by one tuner for a plug...

 

_________________

AU1.5 Wagon, Raptor ProStreet kit, Pacemaker 4499's with 3" collector, 3" metal cat, 3" pipe, Pex BSO660 & BSO439, BA brakes, Sprintgas mixer LPG system, Airod variable-venturi mixer... stealth FTW Sniper tuned!

To be updated... soon!

Top
 Profile  
 
 
 Post subject: Re: The Illustrated Guide to AU & B-Series I6 TMAP Sensors
Posted: Mon May 20, 2013 8:53 pm 
Fordmods Newbie
Offline

Age: 31

Posts: 5

Joined: 14th Jun 2007

Gallery: 16 images

Ride: Falcon

Location: herver bay
QLD, Australia

hI all thankyou for that great information , I am using exactly that setup in my xe , good news is that I found a web page that actually sells that female connector on its own , win !! its supplied with the seal and terminals so it should be a simple process , the web site is www.efihardware.com , down the side bar will be electrical connectors and plugs , click on that , click on the "ford" logo about halfway down the page will be the connector that you require, " ba/f turbo map sensor female connector" simple as registering and buying the item.. hope this helps out ... thanks all

 

_________________

Only milk and juice comes in 2 litres

Top
 Profile  
 
 
 Post subject: Re: The Illustrated Guide to AU & B-Series I6 TMAP Sensors
Posted: Sat Jun 22, 2013 7:17 pm 
Parts Gopher
Offline
User avatar

Age: 25

Posts: 81

Joined: 16th Sep 2012

Gallery: 3 images

Ride: Ford Falcon BF mkII ES

Location: Melbourne
VIC, Australia

Okay, regarding resistance/voltage values, is there any difference between the FG n/a TMAP and a bfII n/a tmap? Unsure whether ba's and bf's share the same part number.
Top
 Profile  
 
 
 Post subject: Re: The Illustrated Guide to AU & B-Series I6 TMAP Sensors
Posted: Sun Jun 23, 2013 12:22 am 
Moderator
Offline

Posts: 14513

Joined: 7th Nov 2004

Ride: ford falcon au3 xr8

Location: a shit suburb in sydney
NSW, Australia

the au 2 , ba and bf n/a share the same tmap sensor, afaik the fg n/a t map has the same p/n and values as the ba/bf turbo t map..
Top
 Profile  
 
 
 Post subject: Re: The Illustrated Guide to AU & B-Series I6 TMAP Sensors
Posted: Sun Jun 23, 2013 7:15 pm 
Parts Gopher
Offline
User avatar

Age: 25

Posts: 81

Joined: 16th Sep 2012

Gallery: 3 images

Ride: Ford Falcon BF mkII ES

Location: Melbourne
VIC, Australia

Thanks Troyman,
Been chasing a rough idling issue ever since I did a FG manifold swap.
Could a FG n/a tmap on a BF n/a cause this?
Top
 Profile  
 
 
 Post subject: Re: The Illustrated Guide to AU & B-Series I6 TMAP Sensors
Posted: Sun Jun 23, 2013 8:11 pm 
Moderator
Offline

Posts: 14513

Joined: 7th Nov 2004

Ride: ford falcon au3 xr8

Location: a shit suburb in sydney
NSW, Australia

if the voltage values are different then yes it could, but it should also have issues under load aswell..
Top
 Profile  
 
 
 Post subject: Re: The Illustrated Guide to AU & B-Series I6 TMAP Sensors
Posted: Sun Jun 23, 2013 8:21 pm 
Parts Gopher
Offline
User avatar

Age: 25

Posts: 81

Joined: 16th Sep 2012

Gallery: 3 images

Ride: Ford Falcon BF mkII ES

Location: Melbourne
VIC, Australia

I can't feel a 'Miss' under load, though it may still be effecting performance.
Thanks mate :]
Top
 Profile  
 
 
 Post subject: Re: The Illustrated Guide to AU & B-Series I6 TMAP Sensors
Posted: Sat Jun 29, 2013 7:32 pm 
Parts Gopher
Offline
User avatar

Age: 25

Posts: 81

Joined: 16th Sep 2012

Gallery: 3 images

Ride: Ford Falcon BF mkII ES

Location: Melbourne
VIC, Australia

In short, after a full day of free dyno tuning at Chisholm tafe (apprentice mechanic advantages ftw) my car's running rich as balls up top end. Rich as in, 10.9 stoichs.
Could the fg n/a tmap makes b's run that rich?
Top
 Profile  
 
 
 Post subject: Re: The Illustrated Guide to AU & B-Series I6 TMAP Sensors
Posted: Sat Jun 29, 2013 8:02 pm 
Moderator
Offline

Posts: 14513

Joined: 7th Nov 2004

Ride: ford falcon au3 xr8

Location: a shit suburb in sydney
NSW, Australia

yes, the voltage is different at load points. you should be able to fit the ba/bf tmap to the fg manifold..
Top
 Profile  
 
 
 Post subject: Re: The Illustrated Guide to AU & B-Series I6 TMAP Sensors
Posted: Sat Jun 29, 2013 8:19 pm 
Parts Gopher
Offline
User avatar

Age: 25

Posts: 81

Joined: 16th Sep 2012

Gallery: 3 images

Ride: Ford Falcon BF mkII ES

Location: Melbourne
VIC, Australia

Yeah it fits, just the plugs are different. Time to hit up a wreckers, or that EFI Hardware site.
Top
 Profile  
 
 
 Post subject: Re: The Illustrated Guide to AU & B-Series I6 TMAP Sensors
Posted: Fri Oct 18, 2013 12:28 am 
Getting Side Ways
Offline

Posts: 631

Joined: 27th Jan 2007

Ride: Supercharged BA XL ute

Location: Gordonvale
QLD, Australia

I know this is old but guys can you tell me what colour wire on a XR6t tmap sensor reads pressure and if I was to put a potentiometer in that wire which one would I need .
Long time no see either boys .
Cheers.

 

_________________

BA XL ute.
P'maker headers',Hi flow cat,3" sports sytem,
Raptor V-clutched lightweight not intercooled,no tranny cooler,no worries.

Top
 Profile  
 
 
 Post subject: Re: The Illustrated Guide to AU & B-Series I6 TMAP Sensors
Posted: Sun Dec 08, 2013 9:09 pm 
Fordmods Newbie
Offline

Posts: 9

Joined: 13th Sep 2008

Location: adelaide
SA, Australia

FG turbo map sensor number is 0 261 230 129 (bosch)and looks like the BA NA plug and sensor(this may be late FG as i have noticed different part numbers for the fg). Info i have got says its a 2.5 bar sensor. Came with the manifold i got along with the injectors etc. wire colours line up with the BA NA plug also. Shouldnt have to mess with the wiring at all........hopefully.
Top
 Profile  
 
 
 Post subject: Re: The Illustrated Guide to AU & B-Series I6 TMAP Sensors
Posted: Sun Dec 08, 2013 9:41 pm 
Getting Side Ways
Offline

Posts: 631

Joined: 27th Jan 2007

Ride: Supercharged BA XL ute

Location: Gordonvale
QLD, Australia

Man I have an NA with a Raptor Supercharger hooked up to it , I need to mess with
the boost referencing to add Water/Meth .

 

_________________

BA XL ute.
P'maker headers',Hi flow cat,3" sports sytem,
Raptor V-clutched lightweight not intercooled,no tranny cooler,no worries.

Top
 Profile  
 
Display posts from previous:
Sort by  
 Page 2 of 3  [ 31 posts ]  Go to page Previous  1, 2, 3  Next

Who is online

Users browsing this forum: No registered users and 7 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Sat Dec 16, 2017 3:35 am All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names