Fordmods Logo

who sell's adj Fuel pres reg for ED? 

 

Page 1 of 1 [ 4 posts ] 

 
 Post subject: who sell's adj Fuel pres reg for ED?
Posted: Sun Apr 24, 2005 4:46 pm 
Oompa Loompa
Offline

Posts: 27

Joined: 5th Feb 2005

Location: adelaide
SA, Australia

g'day where can i find an adjustable fuel pres reg for my ED XR6?


these motors normally run better when leaned of a touch yeah? at the moment it spews raw fuel from the exhaust.
i'd like to install one and get it dyno tuned.
Top
 Profile  
 
 
Posted: Sun Apr 24, 2005 5:36 pm 
Getting Side Ways
Offline
User avatar

Age: 38

Posts: 1440

Joined: 7th Nov 2004

Ride: 320kw BA XR8

Location: Adelaide
SA, Australia

Blackwood dyno use to do them but not sure if it was a direct replacement unit or if it was like the ones available on ebay which just go inline. To reduce fp with these you have to remove or block the factory reg somehow. It is also debatable if you can actually lean out the engien by reducing the fp because the EEC actually recognises this and increases injector pulse width to compensate. It will have some benefit at WOT but won't totally solve the rich problem, you need a chip/edit to do that.
Top
 Profile  
 
 
Posted: Sun Apr 24, 2005 11:28 pm 
Getting Side Ways
Offline

Age: 50

Posts: 912

Joined: 22nd Mar 2005

Gallery: 1 images

Location: FNQ
QLD, Australia

If it's running that rich out the exhaust it sounds like you have a problem somewhere - ie:
Vac leak
Internal fuel leak in regulator (fuel going to engine thru vac hose).
Faulty MAP sensor (or leak in the vac line to it).
Faulty O2 sensor
Faulty Eng. coolant temp sensor
Faulty Inlet Air temp sensor

You need to address the basic problem before thinking about an adjustable regulator.

 

_________________

96 EF Auto GLi - Bilstein Shocks - Adjustable Front sway bar - JMM Cam - TI Perf J3 - TCI 2500/3000 stall converter. 2015 Jeep Cherokee Trailhawk.

Top
 Profile  
 
 
Posted: Sun Apr 24, 2005 11:31 pm 
Getting Side Ways
Offline
User avatar

Age: 38

Posts: 1440

Joined: 7th Nov 2004

Ride: 320kw BA XR8

Location: Adelaide
SA, Australia

If it is overly rich then yeah there is probably a problem somewhere else, but I6's are notorious for running rich even striaght from the factory. THis gets worse with most aftermarket cams because of the MAP system they run.
Top
 Profile  
 
Display posts from previous:
Sort by  
 Page 1 of 1  [ 4 posts ] 

Who is online

Users browsing this forum: No registered users and 7 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Thu Dec 14, 2017 2:06 pm All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names