|
| Blu Falc |
|
|||
|
Just thought of another problem in that I have a seperate trans computer.
How will i fit the EL cop computer? Will an EL loom solve my problems? |
|||
| Top | |
|||
| Blu Falc |
|
|||
|
bump
|
|||
| Top | |
|||
| voxace |
|
|||
|
Keep using it?? What's the problem?
|
|||
| Top | |
|||
| Blu Falc |
|
|||
|
I wont get the different shift points, and wouldnt get the 4th gear lockout below 65km/h, ect
|
|||
| Top | |
|||
| voxace |
|
|||
|
Christ, your bothering with all that for a few small changes like that. Bugger that lol.
Your looking at a big job changing the looms over, and then modifying it to suit your car. You could unplug the transmission related wires and move them to the ECU plug, but that also sounds like a s**t of a job. Easier to shift yourself, and fit the trans lockup mod 
You plan on going 5-speed anytime soon? |
|||
| Top | |
|||
| Blu Falc |
|
|||
|
nah sticking with the auto. The trans lockup mods? thats the feature of the cop computer isnt it, or a seperate mod?
Will the EL ecu plug into the Cpi computer harness? |
|||
| Top | |
|||
| voxace |
|
|||
|
If your really keen, change the looms - but I think you'll find you have to cut and shut a fair bit of it.
Do a search on here, theres a mod which allows manual lockup of the convertor. |
|||
| Top | |
|||
| Blu Falc |
|
|||
|
did a search but didnt find it, will search later
|
|||
| Top | |
|||
| snap0964 |
|
|||
|
Might be this one . . . .
http://www.fordmods.com/forums/viewtopi ... hlight=tcc
_________________ 96 XH Longreach 'S': LPG, Alarm, 3.23:1 LSD, Cruise, Trip Comp, ABS, Power Windows, Mid Series Dome Lt, Climate Ctrl |
|||
| Top | |
|||
| Disco Frank |
|
|||
|
anton what about swapping every loom in the car to the el loom...
then the ecu will plug in.. your ecu will work the trans and the bb manifold etc ohh u will need a El dash and bem which i think u have..
_________________ RIP SCOTT |
|||
| Top | |
|||
| Blu Falc |
|
|||
|
Disco Frank wrote: anton what about swapping every loom in the car to the el loom...
then the ecu will plug in.. your ecu will work the trans and the bb manifold etc ohh u will need a El dash and bem which i think u have.. yer might do that but i wont swap the complete dash otherwise you have to swap the interior to match |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 20 guests |
