
|
| tearlejc |
|
||
|
Many many moons ago when I were young I remember being in a servo and a mini came in and chirped its tyres on the driveway...only it was the back tyres...intrigued, I wandered over for a look as the guy opened the bonnet, only to see the first couple of spark plugs of a red 6....186, triples, 3 spd manual and a banjo diff. No rear suspension, diff was solid mounted...no tailshaft, just a u joint between g box and diff....and no, he hadn't mentioned to the rego people that the vehicle was modified because he wasn't sure whether it would pass.....okey dokey I said...picked my jaw up off the ground and went about my business. Never forget that one....Oh, and a big home made tin box in the interior so you didn't burn yourself on the engine......
_________________ 351 4V XB Coupe running LPG |
||
| Top | |
||
| ToranaGuy |
|
|||
|
That v6 laser would be a weapon! There are a few 2.0 to 2.5lt mazda v6's and fwd transmissions that could be fit with a bit of work & remain road legal. Maybe the locally delivered tx5 v6 & trans is the go?
There's a mighty boy or two getting around with ls1 v8's in them, nowhere near road legal, but a great burnout car! I prefer my car's road legal so i can drive them. Cheers ToranaGuy
_________________ I am the ToranaGuy!|74 Lh Torana Turbo|78 Hz PanelVan|86 Mighty Boy Ute|93 EB2 Ghia,GT Mockup,5spd,LPGI,Full Leather|2 x EB Xr8 5spd's|{DESCRIPTION}|{DESCRIPTION}|{DESCRIPTION}| |
|||
| Top | |
|||
| BAXLS03 |
|
|||
|
I know it's a bit off topic but it seem's to be the way this thread is going... Check this out for power to weight ratio!!
http://www.youtube.com/watch?v=GEF329uKP8Q Also check out some of the smart car's and the mini's... I want one! |
|||
| Top | |
|||
| Troy |
|
||
|
if i was to do a laser i'd just go cosworth
|
||
| Top | |
||
| Esteven8 |
|
|||
|
{USERNAME} wrote: That v6 laser would be a weapon! +1 The acceleration from the original 1.6 alone isn't to be sneezed at. Mines a TON of fun to drive, but crap top end. But with that V6? Hmmmmmmm Wonder if there's any V6 Couriers or Explorers at the wreckers??
_________________ {USERNAME} wrote: Cheap pads squeal like cheap hookers, and you can take that to the bank. {DESCRIPTION} {DESCRIPTION} |
|||
| Top | |
|||
| 87SIlude |
|
||
|
Eunos v6 is quite small.
There's a 4runner at work, owner wants a v8holden engine in it. It fits. Just need to bell the front of the sump out and make the middle section lower to clear the front diff and rack. |
||
| Top | |
||
| Troy |
|
||
|
thats what body lifts are for,its been done plenty of times
|
||
| Top | |
||
| ToranaGuy |
|
|||
|
{USERNAME} wrote: {USERNAME} wrote: That v6 laser would be a weapon! +1 The acceleration from the original 1.6 alone isn't to be sneezed at. Mines a TON of fun to drive, but crap top end. But with that V6? Hmmmmmmm Wonder if there's any V6 Couriers or Explorers at the wreckers?? Can those V6's be used in fwd? Otherwise they wouldn't be legal in a laser, need a fwd v6 like the 92 on fwd v6 Telstar Tx5. Cheers ToranaGuy
_________________ I am the ToranaGuy!|74 Lh Torana Turbo|78 Hz PanelVan|86 Mighty Boy Ute|93 EB2 Ghia,GT Mockup,5spd,LPGI,Full Leather|2 x EB Xr8 5spd's|{DESCRIPTION}|{DESCRIPTION}|{DESCRIPTION}| |
|||
| Top | |
|||
| 87SIlude |
|
||
|
Troy. I think you just saved us a heap of hastle. Itd need to be about a 4 inch lift tho.
Unless just did a 2inch and then would have room at the back to make it the same depth as the front and extend the front a bit to make up the rest. |
||
| Top | |
||
| Esteven8 |
|
|||
|
{USERNAME} wrote: {USERNAME} wrote: {USERNAME} wrote: That v6 laser would be a weapon! +1 The acceleration from the original 1.6 alone isn't to be sneezed at. Mines a TON of fun to drive, but crap top end. But with that V6? Hmmmmmmm Wonder if there's any V6 Couriers or Explorers at the wreckers?? Can those V6's be used in fwd? Otherwise they wouldn't be legal in a laser, need a fwd v6 like the 92 on fwd v6 Telstar Tx5. Cheers ToranaGuy Well here is the ad for the Laser in question, it is not, as I thought first off, a courier or explorer engine. Quote: Ford Laser with KL-ZE 2.5 V6 engine conversion. Rego expires 20 jan'11. Engine has low KM's. Has had recent service (approx 1.5k-2k ago) with oil + filter change using mobil1 5w-30 fully synthetic, bosch platinum spark plugs, coolant change and air filter clean. New Front tyres (4 wheel alignment carried out aswell) - Toyo Proxes4 have lots of life left (approx 6-7mm) and rear tyres - Good Year Eagle F1's (approx 5mm) KC-ZE 2.5 V6 Genie Exhaust System Intake system Twin plate sprung clutch Lightened flywheel LSD Close ratio gearbox Custom driveshafts and engine mounts K-tech front sway bar Eurotech front/rear suspension arms Pedders Gas Shock-absorbers New SuperPro suspension bushes allround TX3 brake conversion Pulsar GTI-R front seats Lightened carpet and door trims Interior is immaculate passed pit inspection last month(august). not missed a beat. Seriously quick car. only used 98 octane fuel and mobil1 fully synthetic oil. most receipts for vehicle present. Priced to sell. Regretful sale, but purchasing a motorbike for summer. Sounds like fun
_________________ {USERNAME} wrote: Cheap pads squeal like cheap hookers, and you can take that to the bank. {DESCRIPTION} {DESCRIPTION} |
|||
| Top | |
|||
| phongus |
|
|||
|
didn't someone put 2 engines in the one car? I think it was in an Audi making it an all wheel drive. Looked crazy.
_________________ phongus = Post whore 2006 |
|||
| Top | |
|||
| alfy |
|
|||
|
{USERNAME} wrote: didn't someone put 2 engines in the one car? I think it was in an Audi making it an all wheel drive. Looked crazy. a tuning company (MTM i think) took an audi TT and shoved an engine at each end. if i remember correctly the combined output was nearly 700kW
_________________ 2021 V6 Manual Amarok - 245kw/750nm - many goodies |
|||
| Top | |
|||
| ToranaGuy |
|
|||
|
Yep, that's the Tx5 V6, KL-ZE engine. That would be wicked fun in a laser!
Cheers ToranaGuy
_________________ I am the ToranaGuy!|74 Lh Torana Turbo|78 Hz PanelVan|86 Mighty Boy Ute|93 EB2 Ghia,GT Mockup,5spd,LPGI,Full Leather|2 x EB Xr8 5spd's|{DESCRIPTION}|{DESCRIPTION}|{DESCRIPTION}| |
|||
| Top | |
|||
| tearlejc |
|
||
|
{USERNAME} wrote: {USERNAME} wrote: didn't someone put 2 engines in the one car? I think it was in an Audi making it an all wheel drive. Looked crazy. a tuning company (MTM i think) took an audi TT and shoved an engine at each end. if i remember correctly the combined output was nearly 700kW There's been a few 2 engined cars over the years...I remember an Olds Toronado years ago (they are FWD 400 odd cube V8) - guy added a second engine transaxle setup at the rear. I think Jay Leno has one too. Oh, and those old gits like me, remember Blowbak 2? Holden ute that originally had a blown sb chev but kept getting hassled by cops, so he put the chev in the tray - then, because he now had an empty engine bay, put a 253 in it as well - odd choice of motors, must have got the 253 cheap at a boat anchor sale...
_________________ 351 4V XB Coupe running LPG |
||
| Top | |
||
| Damoo |
|
||
|
{USERNAME} wrote: {USERNAME} wrote: {USERNAME} wrote: That v6 laser would be a weapon! +1 The acceleration from the original 1.6 alone isn't to be sneezed at. Mines a TON of fun to drive, but crap top end. But with that V6? Hmmmmmmm Wonder if there's any V6 Couriers or Explorers at the wreckers?? Can those V6's be used in fwd? Otherwise they wouldn't be legal in a laser, need a fwd v6 like the 92 on fwd v6 Telstar Tx5. Cheers ToranaGuy Eunos (Mazda) has a 1.8L V6 I'm quite sure. KL-ZE is also a Mazda engine. |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 0 guests |