Fordmods Logo

1521a specs 

 

Page 1 of 1 [ 9 posts ] 

 
 Post subject: 1521a specs
Posted: Thu May 15, 2014 8:03 pm 
Fordmods Newbie
Offline

Age: 24

Posts: 3

Joined: 10th Feb 2014

Ride: 1994 ford falcon ed xr6

Location: langwarrin
VIC, Australia

Hey everyone im getting a 1521a Wade cam 2nd hand
Without the spec sheet since wade is closed I can't get it aha csn anyone help?
Top
 Profile  
 
 
 Post subject: Re: 1521a specs
Posted: Thu May 15, 2014 8:23 pm 
Getting Side Ways
Offline

Age: 34

Posts: 1110

Joined: 27th Dec 2011

Gallery: 6 images

Ride: ef falcon futura

Power: 154 rwkw

Location: Koo Wee Rup
VIC, Australia

when I get home ill up load a pic

 

_________________

ef futura, pacemakers, 2.5inch catback, k&n panel filter and 3.45 lsd. extractors/cat, ticky head, custom cam grind, t5. now onto cosmetics.

Top
 Profile  
 
 
 Post subject: Re: 1521a specs
Posted: Thu May 15, 2014 8:26 pm 
Fordmods Newbie
Offline

Age: 24

Posts: 3

Joined: 10th Feb 2014

Ride: 1994 ford falcon ed xr6

Location: langwarrin
VIC, Australia

Thanks heaps! !
Top
 Profile  
 
 
 Post subject: Re: 1521a specs
Posted: Thu May 15, 2014 9:52 pm 
Getting Side Ways
Offline

Age: 34

Posts: 1110

Joined: 27th Dec 2011

Gallery: 6 images

Ride: ef falcon futura

Power: 154 rwkw

Location: Koo Wee Rup
VIC, Australia

mate, i cant find the sheet, do a search on here, they should be on here somewhere

 

_________________

ef futura, pacemakers, 2.5inch catback, k&n panel filter and 3.45 lsd. extractors/cat, ticky head, custom cam grind, t5. now onto cosmetics.

Top
 Profile  
 
 
 Post subject: Re: 1521a specs
Posted: Sat May 17, 2014 5:27 pm 
Tyre Shredder
Offline

Age: 47

Posts: 346

Joined: 16th Jul 2007

Ride: EL Falcon

Power: 146 rwkw

Location: sydney
NSW, Australia

W a d e C a m s h a f t s P t y L t d
A.B.N 62 004 544 996
27 Wells Road, Oakleigh, Vic, 3166
Phone (03)9568 0333 Fax (03) 9568 2633 Email info@wadecams.com
Profile Actuation Make/Model R/Ratio
ES1521A Roller Rocker Ford EA - EL SOHC 6 cyl In2 Ex 2
---------------------------------------------------------------------------------------------------
Cam Lift Duration Duration Valve Valve Cam Lift Phase
Adv @050 Clr Lift tdc <)
---------------------------------------------------------------------------------------------------
Intake 262 274 217 Hyd 0.524 038 114
Exhaust 262 274 217 Hyd 0.524 038
---------------------------------------------------------------------------------------------------
Firing Order 1-5-3-6-2-4
Intake Centreline 113.5 Exhaust Centreline 113.5
Duration is at the Lobe
LIFT AT TDC IS MEASURED AT THE LOBE
Timing Timing
Adv @050
Open Close Open Close
Intake 22 Btdc 72 Abdc -5 Btdc 42 Abdc
Exhaust 69 Bbdc 25 Atdc 42 Bbdc -5 Atdc
47 -10
Deg Over-lap Deg Over-lap
Minimum Lifter Dia Ex In
WARNING: Cam followers must have good surface finish and correct radius.
Lubricate well, avoid high RPM for the first 2 hours.
To avoid coil-binding, after the tappets are set, check that the valvespring
can be compressed at least an extra .050" after full lift has
been achieved. This will stop the valve springs from binding
Degreeing Your Camshaft Using Lift At TDC Method
(For Pushrod Engines)
First you must establish Top Dead Centre accurately. Once TDC is achieved, with
camshaft in Place insert a Cam Follower into number one Intake Lifter bore.
Now place a pushrod onto that cam follower and mount a Dial Indicator so it is in the
same plane as the pushrod.
Make sure the cam follower is on the heal (bottom) of the lobe and Zero the dial
indicator.
For chain driven camshafts, rotate the camshaft in the same direction as Crankshaft
rotation until the lift at TDC stated on your Cam Card is achieved. Now you can
install the chain and sprocket set.
For gear driven camshafts such as Holden 6cyl, the camshaft will rotate in the
opposite direction to the crankshaft
PLEASE RETAIN

 

_________________

FORD EL 4.0L. Crow cam, T.I Performance J3 Chip, Vernier cam gear, CMS stage 3 head, 68mm TB, AU head gasket + ARP studs, AU injectors, Pacey 4480, High flow cat, Shift kit, Stallie, 3:73 TrueTrac.

Top
 Profile  
 
 
 Post subject: Re: 1521a specs
Posted: Sat May 17, 2014 5:28 pm 
Tyre Shredder
Offline

Age: 47

Posts: 346

Joined: 16th Jul 2007

Ride: EL Falcon

Power: 146 rwkw

Location: sydney
NSW, Australia

That is at 114 lobe separation.

 

_________________

FORD EL 4.0L. Crow cam, T.I Performance J3 Chip, Vernier cam gear, CMS stage 3 head, 68mm TB, AU head gasket + ARP studs, AU injectors, Pacey 4480, High flow cat, Shift kit, Stallie, 3:73 TrueTrac.

Top
 Profile  
 
 
 Post subject: Re: 1521a specs
Posted: Sat May 17, 2014 5:30 pm 
Fordmods Newbie
Offline

Age: 24

Posts: 3

Joined: 10th Feb 2014

Ride: 1994 ford falcon ed xr6

Location: langwarrin
VIC, Australia

Thanks heaps!!! :)
Top
 Profile  
 
 
 Post subject: Re: 1521a specs
Posted: Sat May 17, 2014 5:31 pm 
Tyre Shredder
Offline

Age: 47

Posts: 346

Joined: 16th Jul 2007

Ride: EL Falcon

Power: 146 rwkw

Location: sydney
NSW, Australia

Intake 262 274 217 Hyd 0.524 038 114
Exhaust 262 274 217 Hyd 0.524 038
---------------------------------------------------------------------------------------------------
Firing Order 1-5-3-6-2-4
Intake Centreline 113.5 Exhaust Centreline 113.5
Duration is at the Lobe
LIFT AT TDC IS MEASURED AT THE LOBE
Timing Timing
Adv @050
Open Close Open Close
Intake 22 Btdc 72 Abdc -5 Btdc 42 Abdc
Exhaust 69 Bbdc 25 Atdc 42 Bbdc -5 Atdc
47 -10
Deg Over-lap Deg Over-lap

 

_________________

FORD EL 4.0L. Crow cam, T.I Performance J3 Chip, Vernier cam gear, CMS stage 3 head, 68mm TB, AU head gasket + ARP studs, AU injectors, Pacey 4480, High flow cat, Shift kit, Stallie, 3:73 TrueTrac.

Top
 Profile  
 
 
 Post subject: Re: 1521a specs
Posted: Sat May 17, 2014 5:33 pm 
Tyre Shredder
Offline

Age: 47

Posts: 346

Joined: 16th Jul 2007

Ride: EL Falcon

Power: 146 rwkw

Location: sydney
NSW, Australia

Not a problem bud

 

_________________

FORD EL 4.0L. Crow cam, T.I Performance J3 Chip, Vernier cam gear, CMS stage 3 head, 68mm TB, AU head gasket + ARP studs, AU injectors, Pacey 4480, High flow cat, Shift kit, Stallie, 3:73 TrueTrac.

Top
 Profile  
 
Display posts from previous:
Sort by  
 Page 1 of 1  [ 9 posts ] 

Who is online

Users browsing this forum: No registered users and 36 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Mon Dec 11, 2017 3:10 pm All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names