Fordmods Logo

99 au thermo fan 1 


Page 1 of 1 [ 3 posts ] 

 Post subject: 99 au thermo fan 1
Posted: Tue Jan 28, 2014 8:31 am 
Getting Side Ways
User avatar

Age: 54

Posts: 1967

Joined: 13th Aug 2005

Ride: 2000 Au wagon

Location: some where in nsw
NSW, Australia

99 au , fan one not getting power to the relay, if i bridge the out put terminal on the relay from the battery it works , where does the signal for it to turn on come from?




 Post subject: Re: 99 au thermo fan 1
Posted: Tue Jan 28, 2014 6:54 pm 
Getting Side Ways

Posts: 496

Joined: 14th Sep 2011

Ride: BF II Gas Ute

Location: Canberra
ACT, Australia


There is a good write up in the Tech. Docs. I think the AU was much the same as my EL, with 2 fans and 3 relays. There are 2 control signals from the ECU, fans on and then another for high. In the low setting, the Fans are in series, and high they are in parallel. Sometimes the ECU needs to be reset, as it wont run them on high. Hope this helps.



Regards 96ELGli

 Post subject: Re: 99 au thermo fan 1
Posted: Tue Jan 28, 2014 7:54 pm 
Technical Contributor
User avatar

Age: 32

Posts: 3714

Joined: 27th Sep 2006

Gallery: 20 images

Ride: ED Falcon

Power: 133 rwkw

Location: Leeton
NSW, Australia

One of the contact pins on fan 1 relay should have power and one of the coil wires should have power with the key on... The computer grounds the other side of the coil wire to engage the relay when the car is getting hot... That relay must also come on for high speed otherwise only one fan will work on high speed...

My AU the high speed only engages on a really hot day when the AC system builds too much pressure... It runs on low speed most days when stopped idling... And probably doesn't run at all when driving...




93 Red ED 5spd Manual Build Thread

Performance: Complete AUII VCT Wiring & Power Train, Pacey Headers, 2.5" Exhaust, Exedy Clutch, DBA Rotors
Visuals: FG XR Wheel, XR Front, 17's, BA 5 Spd Shifter, BA Ghia Window Switches, NL Cluster
Tunes: 8" Pioneer Sub, JBL Speakers, Clarion Double DIN Headunit

Display posts from previous:
Sort by  
 Page 1 of 1  [ 3 posts ] 

Who is online

Users browsing this forum: No registered users and 33 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum



It is currently Thu May 19, 2022 10:58 am All times are UTC + 11 hours



(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names