|
| TimmyA |
|
|||
|
My god that EB is nice...
 2 questions... How hard was it to mount up that BA Instrument Panel (assume its all wired off the BA computer and would be probably be very hard to make work on a standard E series...) And are the seats easy to modify to fit (Did you use factory holes)? Thanks, Tim
_________________ 93 Red ED 5spd Manual Build Thread |
|||
| Top | |
|||
| bollocks |
|
||
|
timmytimtim wrote: My god that EB is nice... Hey Tim, Nah the BF cluster was easy to mount we just made a hybrid of the to clusters & wiring yes its wired to the BF PCM and its a piece of cake to do. The seatys pretty much bolted straight it all we had to do was make the rail holes a bit bigger & make a mount for the inner rear on both sides. Oh we also had to make a hybrid fuel sender unit for the fuel gauge, Just used a BF float & resister assembly on EB pump housing.
2 questions... How hard was it to mount up that BA Instrument Panel (assume its all wired off the BA computer and would be probably be very hard to make work on a standard E series...) And are the seats easy to modify to fit (Did you use factory holes)? Thanks, Tim |
||
| Top | |
||
| bollocks |
|
||
|
fordman351 wrote: Pics pics pics pics pics pics pics!  Plenty of pic's for you fordman, BTW how's your beast going. |
||
| Top | |
||
| TimmyA |
|
|||
|
You got a BA rear seat in that too?
Thats remarkable that it was easy to do... EF/EL seats look like a major pain in the a** to get in... (new floor holes etc)... You used BA rails or ED rails to get them to screw to the floor? Whats a set of nice BA seats worth... probably many hundreds I assume?
_________________ 93 Red ED 5spd Manual Build Thread |
|||
| Top | |
|||
| bollocks |
|
||
|
timmytimtim wrote: You got a BA rear seat in that too? We used the BA rails, No the rear seat is just EF fairmont but a want to get it re-trimed to match the fronts. You will pay around $750-1000 for a good set.
Thats remarkable that it was easy to do... EF/EL seats look like a major pain in the a** to get in... (new floor holes etc)... You used BA rails or ED rails to get them to screw to the floor? Whats a set of nice BA seats worth... probably many hundreds I assume? |
||
| Top | |
||
| EFFalcon |
|
|||
|
I got BF XR seats/door trims for $550 on ebay.
not quite as nice as the seat above but certainly an improvement from the old gear  you can make the BA seat reat fit.. but retrimming stock stuff to match is probably easier. just more expensive 
_________________ FALCN6 - EF GLi Turbo, 20" Rims, Air Bag Suspension, Straight LPG, 225rwkw |
|||
| Top | |
|||
| bollocks |
|
||
|
EFFalcon wrote: I got BF XR seats/door trims for $550 on ebay. Yeah you can find some good bargains, But will pay more for FPV stuff.
not quite as nice as the seat above but certainly an improvement from the old gear you can make the BA seat reat fit.. but retrimming stock stuff to match is probably easier. just more expensive |
||
| Top | |
||
| markr154 |
|
|||
|
Replied to your PM Owen!
_________________ Hot Chilli Red EL XR6, 5-spd, JMM DEV 5 enhanced (161 rwkw custom tuned), Eliminator Switch Chip, 18" BA GTP rims, Pedders Superlows, BA XR6 badges, BA Sunroof, Pioneer Stereo, Splits, 6x9's, 10" sub, 700W 6-ch Viper amp.
|
|||
| Top | |
|||
| P100 Ute |
|
|||
|
i just picked up a street fords 56 while at the shops and noticed a EB XR6T in there.
but its not the same one as in here. the one in there is light blue. and offers some secrets of getting it nice n low in the engine bay has lots of pix too which is good.
_________________
|
|||
| Top | |
|||
| graham_h |
|
||
|
awesome job guys
not meaning to hijack the thread but I need an engine swap done. Any Brisbanites want the job ? Cash is there for someone who does. Cheers Graham |
||
| Top | |
||
| fordman351 |
|
|||
|
bollocks wrote: fordman351 wrote: Pics pics pics pics pics pics pics! Plenty of pic's for you fordman, BTW how's your beast going. That's absolutely spectacular! I heart your car, gives me inspiration. My car? It's going, but that's about it haha. I havn't even touched any of the turbo bits yet. Money is a bit thin these days and it's getting a bit disheartening 
|
|||
| Top | |
|||
| revhead_88 |
|
|||
|
P100 Ute wrote: i just picked up a street fords 56 while at the shops and noticed a EB XR6T in there. but its not the same one as in here. the one in there is light blue. and offers some secrets of getting it nice n low in the engine bay has lots of pix too which is good. Yeah, that would be my car heres a link if you want a read http://www.boostedfalcon.net/viewtopic.php?f=3&t=1508 |
|||
| Top | |
|||
| Troy |
|
||
|
don't know if i would do this myself not the n/a motor anyway as you could get more power for the cost out of the e series motor...tho dohc would be nice. but if i had the money i'd do the turbo one...looks bloody awsome tho, look the seats too
|
||
| Top | |
||
| U-T-R |
|
||
|
to4+turbo e series 6 and supra box good for over 400hp no worries
10 sec in a eb |
||
| Top | |
||
| bunghole |
|
||
|
hey dude
where did you get that front bar?? how much did it set you back Thanks man
_________________ vaaaaaauuuuummmmmmmmmmmmmm ppsshhhhhhhhhhhhhtt vaaaaauuuummmmmm |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: Google [Bot] and 50 guests |
