Fordmods Logo

BF Stalling 

 

Page 1 of 1 [ 5 posts ] 

 
 Post subject: BF Stalling
Posted: Sun Jul 09, 2017 9:31 pm 
Fordmods Newbie
Offline

Age: 40

Posts: 11

Joined: 4th Oct 2005

Location: perth
WA, Australia

Hi All,

I have a BF Falcon that stalls once in a while.

Mainly at low speed. Like if I pull up at the lights - it will shudder then stop.
Once I start it again it goes ok.

I got the following codes after getting it done at super cheap:

P1270 ( engine speed rev / limiter reached )
P2110 ( throttle actuator control fault ( TAC ))
P1507 ( idle air control fault ( IAC ))

Any ideas appreciated.

Thanks.
Top
 Profile  
 
 
 Post subject: Re: BF Stalling
Posted: Mon Jul 10, 2017 2:15 pm 
Getting Side Ways
Offline
User avatar

Age: 64

Posts: 3455

Joined: 11th Jan 2009

Ride: BA Falcon XT

Location: Smithfield
NSW, Australia

Check your PCV valve, the TPS (Throttle Position Sensor) and check the HEGO (O2 Sensor).
While you are at it, check that the inlet manifold bolts are tight. Check the Air Filter and make sure it is clean then check the rubber seal from the Air cleaner intake to the Throttle body and see if it is okay.

BTW, you can remove the O2 Sensor and give it a clean then see how that goes? You would be surprised how much difference it can make :)

PCV Valve
TPS
HEGO
Top
 Profile  
 
 
 Post subject: Re: BF Stalling
Posted: Mon Jul 10, 2017 2:16 pm 
Getting Side Ways
Offline
User avatar

Age: 64

Posts: 3455

Joined: 11th Jan 2009

Ride: BA Falcon XT

Location: Smithfield
NSW, Australia

One other thing may help, fill the tank and put a bottle of Injector clean in it then take a good long drive.
Top
 Profile  
 
 
 Post subject: Re: BF Stalling
Posted: Mon Jul 10, 2017 6:36 pm 
Fordmods Newbie
Offline

Age: 40

Posts: 11

Joined: 4th Oct 2005

Location: perth
WA, Australia

Thanks for all that.

Ive done all that now. How do I check the TPS?

Thanks.
Top
 Profile  
 
 
 Post subject: Re: BF Stalling
Posted: Mon Jul 10, 2017 10:47 pm 
Stock as a Rock
Offline

Age: 64

Posts: 142

Joined: 4th Feb 2016

Location: australia
VIC, Australia

You need a scan tool to check the function of the accelerator pedal switch, it does multiple functions.
Top
 Profile  
 
Display posts from previous:
Sort by  
 Page 1 of 1  [ 5 posts ] 

Who is online

Users browsing this forum: Google [Bot] and 9 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Tue Dec 19, 2017 6:13 am All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names