Fordmods Logo

chemiweld 

 

Page 1 of 1 [ 6 posts ] 

 
 Post subject: chemiweld
Posted: Sun Sep 25, 2016 8:02 pm 
Parts Gopher
Offline

Age: 29

Posts: 87

Joined: 6th Aug 2014

Ride: ford

Location: yorke peninsula
SA, Australia

hi

when you have a e series that still runs with a leaking head/head gasket and its only blowing steam out tail pipe and pressurising cooling system and not mixing water and oil whats chance of chemiweld buying you 12-18 months if not more if you follow directions exactly on bottle

also have a ed fairmont and when it was on road that blew a head and leaked externally and probably pressurised radiator too and threw some chemiweld in and was still going nearly 2 years later and didnt follow directions exactly which is flush old coolant out, put water in only, run it till a bit hotter to get air out, then slowly tip chemiweld in, run it for about 15 minutes or so at that temp, top up water and remove restriction before taking off, drive until sorted, then drain and flush and put coolant in

what would yous go with out of chemiweld and liquid intelligence head repair
Top
 Profile  
 
 
 Post subject: Re: chemiweld
Posted: Sun Sep 25, 2016 8:39 pm 
Getting Side Ways
Online
User avatar

Posts: 2353

Joined: 22nd Jan 2009

Ride: '91 EB Wagoon

Location: Geeelong
VIC, Australia

Top
 Profile  
 
 
 Post subject: Re: chemiweld
Posted: Sun Sep 25, 2016 9:24 pm 
Moderator
Offline
User avatar

Age: 39

Posts: 2268

Joined: 6th Oct 2005

Ride: 93EB Fairmont / BA Falcon

Location: Western Sydney
NSW, Australia

Mad2 wrote:
this has already been discussed before :!:


Yes it has.

Car1001 here is a link to the thread in case your memory has gone on you...
Dont know why your expecting different answers to when you asked last time.

post1444718.html#p1444718

:roll:

 

_________________

93 EB II Fairmon8 with 17' EL GT's / Clear indicators / H.I.Ds / Sports exhaust / Lowered 2' / K&N / XR6 ECU.
2004 BA MKI XR6T in Lightning Strike paint / K&N / XR8 bonnet / BF lights and a few tweaks.

Top
 Profile  
 
 
 Post subject: Re: chemiweld
Posted: Sun Sep 25, 2016 9:38 pm 
Technical Contributor
Offline

Age: 59

Posts: 6794

Joined: 22nd Jun 2005

Gallery: 8 images

Ride: EF Fairmont

Location: Campbelltown
NSW, Australia

F..k me, it's back................. :shock:

 

_________________

SWC

South West Customs


Members of the SWC Stable, fordebgt93, TROYMAN, Benj, svo_matt, Mrs C, eb_fairmont, Total_tool, Terroristghia

Top
 Profile  
 
 
 Post subject: Re: chemiweld
Posted: Sun Sep 25, 2016 10:58 pm 
Stock as a Rock
Offline
User avatar

Age: 33

Posts: 112

Joined: 27th Apr 2011

Gallery: 6 images

Ride: ea falcon

Location: tanilba bay
NSW, Australia

93EB wrote:
Mad2 wrote:
this has already been discussed before :!:


Yes it has.

Car1001 here is a link to the thread in case your memory has gone on you...
Dont know why your expecting different answers to when you asked last time.

post1444718.html#p1444718

:roll:


In his defence, it has gone from a EF to a ED. :roll:

 

_________________

EA falcon(S-Pac) AU engine and injector's, EL BBM conversion,K&N pod,EL ECU,T5 5speed,EL Streering rack, EL Brake system, Extractor's 2 1/2in high flow cat, through 2 1/2in mandrel bent pipe with Lukey Performance muffler

Top
 Profile  
 
 
 Post subject: Re: chemiweld
Posted: Mon Sep 26, 2016 7:27 am 
Technical Contributor
Offline

Age: 59

Posts: 6794

Joined: 22nd Jun 2005

Gallery: 8 images

Ride: EF Fairmont

Location: Campbelltown
NSW, Australia

Sounds like he has a problem getting good head (s).

 

_________________

SWC

South West Customs


Members of the SWC Stable, fordebgt93, TROYMAN, Benj, svo_matt, Mrs C, eb_fairmont, Total_tool, Terroristghia

Top
 Profile  
 
Display posts from previous:
Sort by  
 Page 1 of 1  [ 6 posts ] 

Who is online

Users browsing this forum: No registered users and 32 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Thu Dec 08, 2016 8:46 pm All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names