|
| kiwi in oz |
|
||
|
I think my coil may be playing up, which brand do you find is best to replace with and a rough price and where to buy it.
|
||
| Top | |
||
| EL__Fairmont |
|
|||
|
Bosch Coil($50-$70), most auto shops will have them like Repco, autobarn, bursons etc.....
Before you buy a new coil, check the condition of the coil lead, ign leads, dizzy cap and rotor button!!!
_________________ 97 EL Fairmont 4l OHC .Silver. |
|||
| Top | |
|||
| kiwi in oz |
|
||
|
Thanks for that, I planned on doing the cap and button as well, leads are pretty new.
I had a slight miss on my EA and changing plugs,leads,cap and button fixed that so I,m a big fan of changing out them every so often. But this is a complete cut out, not a miss |
||
| Top | |
||
| EL__Fairmont |
|
|||
|
kiwi in oz wrote: Thanks for that, I planned on doing the cap and button as well, leads are pretty new.
I had a slight miss on my EA and changing plugs,leads,cap and button fixed that so I,m a big fan of changing out them every so often. But this is a complete cut out, not a miss if it cuts out for a sec or two then it's probably the tfi module on the dizzy breaking down from heat. The tfi module sends the coil the negative trigger(pip) signal to the coil to fire. So yeah I would replace the module($80) or get a new dizzy($100-$250) depending where you buy it from. Or just get a complete one from the wreckers for $30-$50. Cheers..
_________________ 97 EL Fairmont 4l OHC .Silver. |
|||
| Top | |
|||
| kiwi in oz |
|
||
|
It stops dead and sometimes it starts stright away and sometimes 10 minutes later
|
||
| Top | |
||
| GeReN |
|
|||
|
Want to get this cleared up:
Is the rotor button part of a dizzy? Is it the bit that plugs into the side of it? Where is the coil located on an EB I6?
_________________ Brand New Distributor: $50 + other stuffs |
|||
| Top | |
|||
| kiwi in oz |
|
||
|
Where is the cheapest and best place to get a new module or dizzy from?
|
||
| Top | |
||
| naughtyfalcon |
|
|||
|
GeReN wrote: Want to get this cleared up:
Is the rotor button part of a dizzy? Is it the bit that plugs into the side of it? Where is the coil located on an EB I6? the rotor button is inside the distributor and rotates with the shaft,,the coil is normally located under the inlet manifold around 4 and 5 intakes.
_________________
|
|||
| Top | |
|||
| GeReN |
|
|||
|
Thanks mate. I've got a new dizzy, leads and plugs sitting here waiting to go in. Wondering if it's worthwhile to swap the coil for a new one if the engine runs like s**t
_________________ Brand New Distributor: $50 + other stuffs |
|||
| Top | |
|||
| naughtyfalcon |
|
|||
|
i'd do the rest first,see how it runs and take it from there
_________________
|
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: Google Adsense [Bot] and 62 guests |
