Fordmods Logo

Fordmods Advertising

DIY exhaust install 


Page 1 of 1 [ 5 posts ] 

 Post subject: DIY exhaust install
Posted: Thu Jul 06, 2006 10:51 pm 
Fordmods Newbie

Posts: 17

Joined: 16th Feb 2005

Location: Perth
WA, Australia

Hi guys.

Lukey super systems.... rather than paying for someone to install it, would I be capable of installing it myself? Is it bolt on, or are modifications/welding required? Car is AUII.


Posted: Thu Jul 06, 2006 11:20 pm 
Getting Side Ways
User avatar

Age: 40

Posts: 2893

Joined: 24th May 2006

Gallery: 21 images

Ride: XH B&S ute, Navara 4x4

Power: 202 rwkw

Location: Bordertown
SA, Australia

Generally it is going to be much stronger and last longer if you weld it together rather than clamping it. In my eperience exhausts are something worth paying someone else to do. But check and make sure they know what they are doing first. There are some cowboys out there!!! :evil:



You'll ride a black tornado across the western sky

You'll rope an ol' blue norther and milk it 'till it's dry

Bulldog the Diamantina pin its ears down flat

Long before you take this cowboy's hat

Posted: Fri Jul 07, 2006 12:38 pm 
Getting Side Ways

Posts: 988

Joined: 4th Dec 2004

Ride: el faimont, dual fuel

Location: melbourne
VIC, Australia

is it cat back?
yes, than do it your self it should be a bolt on setup. just check to make sure before pulling it apart.

the only time you really need to weld is when fitting extractors as the cat needs to be relocated and hence requires modifing.



why do u write in here.

Posted: Fri Jul 07, 2006 9:12 pm 
Tyre Shredder

Age: 30

Posts: 391

Joined: 9th Feb 2005

Ride: EB falcon 5spd

Location: adelaide
SA, Australia

i done mine my own, and if i can do it, any one can. its was easy.

just pull off your oldone (one flange, then you will need to cut it in half, just with hack saw or chain cutters) then the new one bolts up.

i used ramps, but if you have a pit it will be easier. you do need to clamp it in the middle, but if you want it welded then after its fitted take it to a exhaust place, prolly cost 10 bucks to weld.

really very easy.



1993 EBII GLI, IT'S PERFORMANCE Stage 3 engine,
XH Snorkel, K+N panel, Pacie 4480, High flow cat,
2.5" Lukey cat back system. Monroe GT Gas shocks + struts.

just dyno'd at 140.9RWKW

Posted: Fri Jul 07, 2006 9:16 pm 
Smokin em up
User avatar

Age: 28

Posts: 223

Joined: 1st Jan 2006

Gallery: 3 images

Ride: AU 1 Tonner

Location: Kariong
NSW, Australia

i made my exhaust its good when you work has all the gear :P



To be old and wise you first have to be young and stupid

Display posts from previous:
Sort by  
 Page 1 of 1  [ 5 posts ] 

Who is online

Users browsing this forum: No registered users and 22 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum



It is currently Mon Oct 24, 2016 2:33 pm All times are UTC + 11 hours



(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names