Fordmods Logo

Dyno Figues for EL XR6 

 

Page 1 of 1 [ 7 posts ] 

 
 Post subject: Dyno Figues for EL XR6
Posted: Fri Sep 15, 2006 9:58 pm 
Stock as a Rock
Offline

Age: 30

Posts: 144

Joined: 1st Jun 2006

Gallery: 1 images

Ride: EL XR6

Location: yarrawonga
VIC, Australia

hi guys,
a lil while ago i posted a topic on here asking what people would think my car would put out with the mods i have on there. the current mods are: 2.5" exhaust, Pacemaker extractors, K and N Panel Filter, EL GT Intake.

well yesterday i finally got the chance to get it on there and before people get sceptical about the results let me tell you something. 2 days before, they had a VX S-Pack on there and it made a total of 118rwkw without the air filter. so if anything it may have more there i dont know.

anyway, now i know this, my next pursuit for power is to make the 150 mark. im planning to put a mild crow cam, spark plugs/leads and run it on premium just to see how close i can get to the target. other than that, i might do up the intake as well.

the sheet shows 3 runs. the top one is 136rwkw with the filter in. the next is without the airfilter and the airbox open, the lowest is with the engine at about 4000-4500rpm. anyway, im happy witht the result and i wanted to share it with everyone out there that it isnt hard to get power just choose your mods.

Figures coming soon

 

_________________

EL XR6, 5 Speed Manual, Extractors, Exhaust, 3" Intake, EL GT Intake, Alpine sound system,lowered, 136rwkw.. to come.. another sub and boot install

Top
 Profile  
 
 
Posted: Sat Sep 16, 2006 10:55 am 
Fordmods Junkie
Offline
User avatar

Posts: 3083

Joined: 22nd Sep 2005

Gallery: 13 images

Ride: EF

Location: Melbourne
VIC, Australia

136rwkw, with only exhaust and cold air, alot of people on here make less and their cammed.

although sometimes you get a freak motor, a mate just got his stock au (completely stock) 121rwkw

 

_________________

Image
latest mod: A Service
MY BUILD THREAD

Top
 Profile  
 
 
Posted: Sat Sep 16, 2006 12:58 pm 
Getting Side Ways
Offline

Age: 37

Posts: 775

Joined: 27th Nov 2004

Ride: BA XT Series 2

Location: Cairns
QLD, Australia

Where are the sheets?

 

_________________

Stage 1 stereo install done. Pics in audio section.
Next step is probably a nice exhaust or stage 2 stereo.

Top
 Profile  
 
 
Posted: Sat Sep 16, 2006 3:02 pm 
Getting Side Ways
Offline
User avatar

Age: 40

Posts: 1780

Joined: 31st Jan 2005

Gallery: 10 images

Ride: 07 BF mk2 E-gas wagon + eb 5.0

Power: 174 rwkw

Location: Adelaide
SA, Australia

the fact that you mention that a vx s ran a 118rwkw puts it in perspective and all makes sense to me as that seems way to healthy for a vx unless it was modded.

before this gets out of hand, dyno's are a tuning tool only and only good for comparisons with other people on dyno days when everyone is using same dyno on same day.

at least it shows that your engine is fairly healthy.

 

_________________

eb v8: low loud and fast. just how a v8 should be. i guess the big question is, is it fast enough...

Top
 Profile  
 
 
Posted: Sat Sep 16, 2006 10:56 pm 
Getting Side Ways
Offline

Age: 37

Posts: 775

Joined: 27th Nov 2004

Ride: BA XT Series 2

Location: Cairns
QLD, Australia

HEHE still nice to be able to say still but eh!

 

_________________

Stage 1 stereo install done. Pics in audio section.
Next step is probably a nice exhaust or stage 2 stereo.

Top
 Profile  
 
 
Posted: Sun Sep 17, 2006 11:58 am 
Getting Side Ways
Offline

Posts: 6449

Joined: 11th Nov 2004

by those numbers that dyno was about 15 to 20kw on the happy side.

 

_________________

PERMANENTLY BANNED

Top
 Profile  
 
 
 Post subject: Re: Dyno Figues for EL XR6
Posted: Sun Sep 17, 2006 9:47 pm 
Fordmods Junkie
Offline
User avatar

Age: 38

Posts: 5051

Joined: 5th Nov 2004

Ride: Kia Rio - 1.4L Auto

Power: 238 rwkw

Location: Westside
VIC, Australia

macca20042 wrote:
the sheet shows 3 runs. the top one is 136rwkw with the filter in. the next is without the airfilter and the airbox open, the lowest is with the engine at about 4000-4500rpm. anyway, im happy witht the result and i wanted to share it with everyone out there that it isnt hard to get power just choose your mods.


hahahah... I remember your original post asking for people to quote figures they thought you would get...

I'd love to have EB V8 see this thread now.

http://www.fordmods.com/forums/viewtopic.php?t=31572&highlight=

I remember quoting 140rwkw... Was only 4rwkw off. But smack in my revised area of 135 to 140rwkw. :D

Thanks for letting us know what you got... Starts to confirm suspicions about certain dynos.
Top
 Profile  
 
Display posts from previous:
Sort by  
 Page 1 of 1  [ 7 posts ] 

Who is online

Users browsing this forum: Google [Bot] and 34 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Fri Dec 15, 2017 9:34 pm All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names