|
| dragman |
|
||
|
hi everyone,would like some help please.my son inlaws ef started to miss on weekend,put new plugs in today[mon],car still misses on number 2,all leads working and have listened to number 2 injector can hear it working.have not done compression test as yet, any suggestions would be gratefully recieved.
regards bob |
||
| Top | |
||
| SWC |
|
||
|
What is No5 like?
It the plug on No2 wet or dry, carboned up? Unplug the injector on No2 and see if it is any worse. |
||
| Top | |
||
| ghia97 |
|
||
|
Could also be coil pack going out, run car at night lift hood and look for arching.
|
||
| Top | |
||
| SWC |
|
||
|
ghia97 wrote: Could also be coil pack going out, run car at night lift hood and look for arching. If it was the coilpack, more than likely you would have iisues with 2 & 5. They fire 1&6, 2&5, 3&4. |
||
| Top | |
||
| elvondel |
|
||
|
are you sure its only cylinder 2 missing?
how did you check that? first thought would be coil pack but as SWC said its more than likely you would have issues on both 2 and 5. the other thing if your confident the plugs and leads are fine is actually swap injector 1 and 2 over and see if the issue is still on cylinder 2. just because the injector is clicking doesnt mean its good. the pintal cap could be f**k meaning its not spraying properly... |
||
| Top | |
||
| dragman |
|
||
|
Thanks for the replys people,it is only number 2 missing,what i have found is #2 injector seems loose where it goes into head,it seems to move very easily,dont know if this is normal or not.
regards bob |
||
| Top | |
||
| elvondel |
|
||
|
they have an oring where it goes in which could be flogged out.
Try replacing the o-ring, make sure u put some vaseline on the o-ring when u put it back in |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 75 guests |