|
| makboy86 |
|
||
|
Does any one know what the tool is called to get the black ring that sits on the feul pump off. I tried with a hammer and screw driver but 1 of the teeth nearly snaped off?
(if there is a special tool and where can i get it from) |
||
| Top | |
||
| scotts840 |
|
||
|
anywhere that sells ABW tools. it's the fuel pump removal tool for falcons. costs about $35
|
||
| Top | |
||
| chunkz |
|
|||
|
mate
screw driver on the teeth, hammer smash it two times go onto the next one do the whole round then you can do it with hand
_________________
|
|||
| Top | |
|||
| Timmeh |
|
||
|
I'm all for brute force and ignorance but Scotty is right. Get the right tool.
|
||
| Top | |
||
| x-plode |
|
||
|
Gregorys manual has destructions on how to make one if you want too, also spray some crc around the cap and let it soak a bit and also undo the lid on the fuel tank to let the pressure out, i got away with not having to use the tool then... After my fuking pump siezed christmas day.
|
||
| Top | |
||
| EF 4.9 |
|
||
|
just make one as per the gregorys manual. should only take 10 minutes, all you need is an angle gringer a peice of flat bar and a bolt, (ust the bolt to go through the middle of the thing instead of gutting a 13mm square hole in it.
_________________ They say people don't believe in heroes anymore. Well damn them! You and me, Max, we're gonna give them back their heroes! |
||
| Top | |
||
| scotts840 |
|
||
|
yeah. i use a home made one. has a dead socket welded to it so i can use a 1/2 drive ratchet on it. we've had it since before the tool was available. but when the tool's that cheap and if you don't own a welder. . . . .
|
||
| Top | |
||
| makboy86 |
|
||
|
yea i bought the tool from auto 1 40 bucks its lieka claw very good
|
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 75 guests |
