Fordmods Logo

ef intake onto eb motor into ef 

 

Page 1 of 1 [ 9 posts ] 

 
 Post subject: ef intake onto eb motor into ef
Posted: Mon May 09, 2016 4:27 pm 
Fordmods Newbie
Offline

Posts: 8

Joined: 27th Sep 2015

Ride: au ford/ eb ford

Location: Hervey Bay
QLD, Australia

Hello everyone, pulled everything off my eb motor ready to swap all the intake/ ignition system over due to a f**k head on the burnout car. When doing this I noticed that the ef has a wire running into the timing case (im guessing for a sensor of some sort?) And the eb does not have this, I am wondering if I still need this wire to be connected once I put the motor back into the ef or if it will start and run fine without it?? Any help appreciated thanks guys
Quote:
limiter bash gets the gash :twisted:
Top
 Profile  
 
 
 Post subject: Re: ef intake onto eb motor into ef
Posted: Mon May 09, 2016 4:34 pm 
Technical Contributor
Offline

Age: 66

Posts: 6815

Joined: 22nd Jun 2005

Gallery: 8 images

Ride: EF Fairmont

Location: Campbelltown
NSW, Australia

That wire would be for the Crank Angle Sensor and yes you will need that.

You will need to fit the EF Timing Case to the EB Motor to mound the Crank Angle Sensor.
Top
 Profile  
 
 
 Post subject: Re: ef intake onto eb motor into ef
Posted: Mon May 09, 2016 4:51 pm 
Fordmods Newbie
Offline

Posts: 8

Joined: 27th Sep 2015

Ride: au ford/ eb ford

Location: Hervey Bay
QLD, Australia

Well thats not what I wanted to hear. But thanks mate, so it will all work the same once I swap the timing case?
Top
 Profile  
 
 
 Post subject: Re: ef intake onto eb motor into ef
Posted: Mon May 09, 2016 5:05 pm 
Technical Contributor
Offline

Age: 66

Posts: 6815

Joined: 22nd Jun 2005

Gallery: 8 images

Ride: EF Fairmont

Location: Campbelltown
NSW, Australia

Yes.

When you fit the Cam Sensor to the EB Bolck, remove the gear and from the EB Dizzy and fit it to the EF Sensor so that the gears match with the Aux Gear.
Top
 Profile  
 
 
 Post subject: Re: ef intake onto eb motor into ef
Posted: Mon May 09, 2016 5:33 pm 
Fordmods Newbie
Offline

Posts: 8

Joined: 27th Sep 2015

Ride: au ford/ eb ford

Location: Hervey Bay
QLD, Australia

Im planning on swapping the eb dizzy out with the ef electronic one, do you mean after I do this or?
Top
 Profile  
 
 
 Post subject: Re: ef intake onto eb motor into ef
Posted: Mon May 09, 2016 5:45 pm 
Technical Contributor
Offline

Age: 66

Posts: 6815

Joined: 22nd Jun 2005

Gallery: 8 images

Ride: EF Fairmont

Location: Campbelltown
NSW, Australia

billy93 wrote:
Im planning on swapping the eb dizzy out with the ef electronic one, do you mean after I do this or?


You need to take the drive gear from the dizzy and fit it to the cam sensor so that both gears, Cam sensor and Aux Drive Gear (inside motor) match (original EB).
Top
 Profile  
 
 
 Post subject: Re: ef intake onto eb motor into ef
Posted: Fri May 13, 2016 11:59 am 
Stock as a Rock
Offline
User avatar

Age: 32

Posts: 146

Joined: 30th Jul 2012

Gallery: 1 images

Ride: 91 EB S Pack

Location: The Mallee
VIC, Australia

Sorry for the hijack Billy93.

SWC wrote:
You need to take the drive gear from the dizzy and fit it to the cam sensor so that both gears, Cam sensor and Aux Drive Gear (inside motor) match (original EB).


This is just for consistency's sake right, so you don't have uneven wear on the aux shaft gear?

The dimensions and teeth of the EF synchroniser gear and EA-ED, EL dizzy are the same yeah?

 

_________________

I've never liked Trees since, not one.
~ Vanessa Ives

Top
 Profile  
 
 
 Post subject: Re: ef intake onto eb motor into ef
Posted: Fri May 13, 2016 12:21 pm 
Technical Contributor
Offline

Age: 66

Posts: 6815

Joined: 22nd Jun 2005

Gallery: 8 images

Ride: EF Fairmont

Location: Campbelltown
NSW, Australia

Tommo52 wrote:
SWC wrote:
You need to take the drive gear from the dizzy and fit it to the cam sensor so that both gears, Cam sensor and Aux Drive Gear (inside motor) match (original EB).


This is just for consistency's sake right, so you don't have uneven wear on the aux shaft gear?

It is so the gears match. Chinese dizzies have hard gears and wear the Aux Shaft Gear. Bit like using matching gears for the diff.

The dimensions and teeth of the EF synchroniser gear and EA-ED, EL dizzy are the same yeah?

Aux shafts are the same from EA to AU. Drives gears on the EA-ED/EL Dizzy, EF Cam Sensor and the AU Oil Drive are all the same.
Top
 Profile  
 
 
 Post subject: Re: ef intake onto eb motor into ef
Posted: Fri May 13, 2016 4:34 pm 
Stock as a Rock
Offline
User avatar

Age: 32

Posts: 146

Joined: 30th Jul 2012

Gallery: 1 images

Ride: 91 EB S Pack

Location: The Mallee
VIC, Australia

Thanks SWC.

You're a wealth of information!

 

_________________

I've never liked Trees since, not one.
~ Vanessa Ives

Top
 Profile  
 
Display posts from previous:
Sort by  
 Page 1 of 1  [ 9 posts ] 

Who is online

Users browsing this forum: No registered users and 68 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Fri Mar 29, 2024 4:45 pm All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names