Ok so just replaced my fuel filter leads and plugs went to start it up, starter motor wont even engage now, surely I must of done something when I changed plugs over, has to be something simple, can hear the relays ckick, il check again tho, just had a problem with it starting cranking and not firing but now it just lights up the dash when I turn key over to start it

its a manual conversion to btw

ok so I think one of the leads was around a wire that goes to the starter motor a little red one is dangling near the solenoid, not the big red one that comes out, which pin does it fit on? I'm starting to loose light lol

Wire should be a red with blue trace which pushes on at the solenoid of the starter if it hasn't been broken off
Google picture of starter should help