|
| gogetta |
|
|||
|
what needs to be done to swap EL motor into ED?
want to keep BBM and run thermos
_________________ |
|||
| Top | |
|||
| Paulmac |
|
||
|
There's a couple of threads running on this ATM and the engine conversion stickies at the top of the forum page should answer all of your questions.
After 1219 posts, I guess you know where they are. Cheers, Paul
_________________ What goes around, comes around. |
||
| Top | |
||
| edv8wagon |
|
||
|
Not too difficult, essentially the same as what I did to my XH, just bolted the XR6 head and cam on, bolted the dual plane manifold on, threw in an EL ECU and wired up the manifold. You would also have to throw on the thermo fans, relay block and wire it up.
|
||
| Top | |
||
| glenneaux |
|
||
|
you drop it in, modify your EB loom to suit...
i took the relays for the fans from the EL and the bbm solenoid, you need to provide these with 12v from the ignition and then you need to run the earths from the relays/bbm solenoid and wire up the knock sensor and you're done |
||
| Top | |
||
| edv8wagon |
|
||
|
I've got a spare set of fans and relays if required.
|
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 56 guests |
