Fordmods Logo

Idle Issue... 

 

Page 1 of 1 [ 8 posts ] 

 
 Post subject: Idle Issue...
Posted: Tue Jan 23, 2007 7:14 pm 
Tyre Shredder
Offline
User avatar

Age: 38

Posts: 359

Joined: 19th May 2005

Gallery: 5 images

Ride: EBII T5

Location: Melbourne
VIC, Australia

Lately my idle on cold is nothing short of horrible, it almost stalls, blows black smoke, when warm it steadies out, but you can still notice a slight up and down motion... this is still evident when softly revving....

Any ideas what this could be? the black smoke is worrying

 

_________________

Image

Top
 Profile  
 
 
Posted: Tue Jan 23, 2007 7:23 pm 
Getting Side Ways
Offline
User avatar

Age: 56

Posts: 6467

Joined: 18th Dec 2006

Ride: 93 ED sedan

Power: 161 rwkw

Location: Rockhampton
QLD, Australia

Check the MAP sensor hose at the manifold, they have a habit of splitting.
Thats to start with anyway.

 

_________________

http://youtu.be/jJTh9F3Vgg0

Top
 Profile  
 
 
Posted: Tue Jan 23, 2007 8:38 pm 
Tyre Shredder
Offline
User avatar

Age: 38

Posts: 359

Joined: 19th May 2005

Gallery: 5 images

Ride: EBII T5

Location: Melbourne
VIC, Australia

anyone got a pic of this hose? or can point it out in an engine bay pic?

 

 

Attachments:
114 (Resize).jpg
114 (Resize).jpg [ 452.13 KiB | Viewed 132 times ]

 

_________________

Image

Top
 Profile  
 
 
Posted: Tue Jan 23, 2007 9:33 pm 
Getting Side Ways
Offline
User avatar

Age: 56

Posts: 6467

Joined: 18th Dec 2006

Ride: 93 ED sedan

Power: 161 rwkw

Location: Rockhampton
QLD, Australia

You'll have to jack up the car to see it from underneath. It is toward the rear of the manifold on the inside near the IAT sensor. it is hard to see, but you can feel it.

 

_________________

http://youtu.be/jJTh9F3Vgg0

Top
 Profile  
 
 
Posted: Wed Jan 24, 2007 4:55 pm 
Stock as a Rock
Offline

Age: 42

Posts: 119

Joined: 1st Feb 2006

Ride: 95 NF Fairlane

Location: melbourne
VIC, Australia

Disturbed_Dave wrote:
anyone got a pic of this hose? or can point it out in an engine bay pic?
if you have a look to the left hand side of the engine bay directly inline with the mainifold , on the fire wall you will see a little black box with a plug and a hose .. folow that hose and it goes into the manifold just under a quater of the way in .. on the inside of it ... it joines up to a union thats the hose its not hard to find dude .. you may have to move some of the loom away to find it but it is there .. like i said just look for a little black box with a plug with about 5 or so wires on it and a vac hose .. cheers dude hope you find it ok

 

_________________

93 EB 4 Speed auto , 2 1/2 sports from cat back , pod filter , LSD , super low suspenstion , mok tickford rims 15" , 7 colour changing led parker lights , led no plate lights and still want more .. allooootttttttttttt more ..

"Drive it , Like you stole it " ... so whats your excuse :D

Top
 Profile  
 
 
Posted: Wed Jan 24, 2007 4:58 pm 
Stock as a Rock
Offline

Age: 42

Posts: 119

Joined: 1st Feb 2006

Ride: 95 NF Fairlane

Location: melbourne
VIC, Australia

on the pic that you have provided you can see the map sensor ... have a look where your washer hose comes down and you can see the top of a little black box to the lef of it .. behind all of the loom .. have a look and youll find it mate

 

_________________

93 EB 4 Speed auto , 2 1/2 sports from cat back , pod filter , LSD , super low suspenstion , mok tickford rims 15" , 7 colour changing led parker lights , led no plate lights and still want more .. allooootttttttttttt more ..

"Drive it , Like you stole it " ... so whats your excuse :D

Top
 Profile  
 
 
Posted: Wed Jan 24, 2007 5:08 pm 
Technical Contributor
Offline
User avatar

Age: 39

Posts: 5855

Joined: 5th Nov 2004

Gallery: 8 images

Ride: '95 EF's

Location: Leederville
WA, Australia

circled in red (best i could do in MS paint!)

Image

 

_________________

R.I.P. Scotty

Top
 Profile  
 
 
Posted: Wed Jan 24, 2007 6:15 pm 
Tyre Shredder
Offline
User avatar

Age: 38

Posts: 359

Joined: 19th May 2005

Gallery: 5 images

Ride: EBII T5

Location: Melbourne
VIC, Australia

Cheers guys, i actually found the problem today after work, and it IS the hose, it has split down the bottom... so ill be replacing that tomorrow when i get a new hose

thanks for the input guys!

 

_________________

Image

Top
 Profile  
 
Display posts from previous:
Sort by  
 Page 1 of 1  [ 8 posts ] 

Who is online

Users browsing this forum: No registered users and 33 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Sun May 05, 2024 9:10 am All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names