|
| wild_cleveland |
|
|||
|
has anyone had experience with the spray on the i6 in an ef? i was going to buy a 50hp sniper kit but iv heard they have to be plumbed into the manifold as i was going to plumb it into the throttle body? cheers
_________________ If it has wheels or a skirt, You can't afford it. |
|||
| Top | |
|||
| 67RCE |
|
||
|
go onto boostedfalcon.net and ask YBYAVL how he does his setup, 100hp Dry shot on an ED Fairmont
_________________ ILL60 - EF XR8, Sunroof, Ticky Kit, 19x8.5/19x11 TE37's, 347, AFr185's, TFS BoxRcustom converter, Hurst Quarterstick, huge billet cam. |
||
| Top | |
||
| FLASH |
|
|||
|
I have a 50hp shot on mine, its zex and it pumps the fuel as well (wet) you would be better off going with a wet rather than dry setup. Oh and about 6 inches from the throttle body is where you want the nozzle.
_________________ FALCAHOLIC |
|||
| Top | |
|||
| xr6eat 50 |
|
|||
|
wild_cleveland wrote: has anyone had experience with the spray on the i6 in an ef? i was going to buy a 50hp sniper kit but iv heard they have to be plumbed into the manifold as i was going to plumb it into the throttle body? cheers I have had alot i am currently building a motor to run a 175shot and i had a 75 shot on my old motor. Write a list of questions you want answers too and i will help you out. BE CAREFUL BAD ADVICE CAN DESTROY YOUR MOTOR. I have had alot of experience with nos on the I6 and can answer any questions you have regarding them.
_________________ EF XR6 Manual 271RWHP/199RWKW N/A using Stock manifold with dual plane runners still operating. EFI Hardware 6TBM to come mid year. |
|||
| Top | |
|||
| FLASH |
|
|||
|
4 & 6 Cylinder Nitrous System
Part #82021 -------------------------------------------------------------------------------- A complete "Wet" nitrous system. Everything is included for a safe, proper installation. • Designed to work safely on stock type engines, but is also engineered to perform flawlessly on highly modified turbocharged and supercharged combinations. The ideal nitrous system for any fuel injected vehicle. • All major components are factory pre-assembled inside the "Nitrous Management Unit". Easy, plug and play, two-hour installation. • ZEX Nitrous Systems have an advanced, patented feature called "Active Fuel Control". This feature monitors nitrous bottle pressure and adds or subtracts enrichment fuel so the engine never runs too rich, or too lean, when you engage the nitrous system. • ZEX "Wet" nitrous systems activate at wide-open throttle using advanced electronics that monitor your engine's throttle position sensor. This makes using your nitrous system very easy and reliable. http://zex.com/ Worked for me, engine still goes  , you'll be fine with a 50hp wet.
_________________ FALCAHOLIC |
|||
| Top | |
|||
| xr6eat 50 |
|
|||
|
P.M sent
_________________ EF XR6 Manual 271RWHP/199RWKW N/A using Stock manifold with dual plane runners still operating. EFI Hardware 6TBM to come mid year. |
|||
| Top | |
|||
| FLASH |
|
|||
|
You send a pm? share your worldly advice with everyone. That's what forums are for, no?
_________________ FALCAHOLIC |
|||
| Top | |
|||
| xr6eat 50 |
|
|||
|
Mate i will if you really want it but it was a massive pm about nitrous. People might get a bit angry with a 1000+ word post! If you want it I will send it to you.
_________________ EF XR6 Manual 271RWHP/199RWKW N/A using Stock manifold with dual plane runners still operating. EFI Hardware 6TBM to come mid year. |
|||
| Top | |
|||
| FLASH |
|
|||
|
Oh
 Yeah send it mate, nothing wrong with expanding the old gray matter.
_________________ FALCAHOLIC |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: Google Adsense [Bot] and 68 guests |
