Fordmods Logo

Fordmods Advertising

mpfi tutorial says................... 


Page 1 of 1 [ 3 posts ] 

 Post subject: mpfi tutorial says...................
Posted: Sun Jul 02, 2006 5:43 pm 
Fordmods Newbie

Age: 38

Posts: 8

Joined: 11th Jun 2006

Ride: ea

Location: melb
VIC, Australia

hi ive finished my mpfi convertion but it wont start.on the tutorial it says to cut the grey/white wire near the idle motor plug and extend it upto the main loom plug and add a pin on the end.then put it into the so that it lines up with the grey/white wire on the mpfi loom.does this need to be done i would have thought that just swapping to a mpfi loom on would be okay.if it does need to be done then what exactly is the idle motor plug?



eb v8 strait gas.twin console.lowered

Posted: Mon Jul 03, 2006 12:00 pm 
Smokin em up
User avatar

Age: 30

Posts: 247

Joined: 24th Nov 2005

Location: Brissy
QLD, Australia

The isc plug will not cause the car to not start. What does the car do, does it crank over with spark(if so it's your dizzy, probably 1 cog out, retarded timing too much).

If no spark then do you have a little pink wire down near the throttle body that isn't connected.?

You hooked up ya fuel lines the right way?
Posted: Mon Jul 03, 2006 1:09 pm 
Smokin em up

Age: 29

Posts: 235

Joined: 10th Nov 2005

Ride: S2 TI R31

Location: Melbourne
VIC, Australia

My car refused to crank when i had my TPS wired up =\. I still dont have it hooked up :(. Try unwiring the wire and try to crank it.
Display posts from previous:
Sort by  
 Page 1 of 1  [ 3 posts ] 

Who is online

Users browsing this forum: No registered users and 10 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum



It is currently Sun Oct 23, 2016 3:15 am All times are UTC + 11 hours



(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names