hi im new to the site. i have a series 1 EB falcon 3.9 TBI. i have allready installed a 2.5" sports exhaust, i also have aa set of extractors on the way and a new cat for it. now my question is that i am after just some basic things i can do to hot the engine up a bit, im not looking at haveing a horsepower warrior engine, just one that sounds nice with a little more go. i have been looking at a variety of cams and am not sure what i am looking at, all i want is a cam that will give it a small lump with a bit better performance in the mid range. any advice on a cam woud be greatly appreciated.
as for the tbi injecton, im stripping the multipoint manifold off a eb im also useing the ecu from it aswell, i will later on be looking at mabe going to a later model inline 6 but at the moment i want to work with the engine i allready have. all suggestions will be taken into consideration. thanks for your time.

im pretty sure if your after a cam the lumpiest you can go its the 977b cam before you have reprograme or change the computer.

Been a number of years since I have studied the ol 6cyl, but I believe 977b needs to be tuned for it to run. 1673 will run on standard computer but isn't as well suited for an auto as a 1636.

As I said, this is coming from the depths of the memory bank.

thanks for the reply ill do a little more research into the cams and see what i find.