Fordmods Logo

OK...I Want to make a small circuit which... 

 

Page 1 of 1 [ 7 posts ] 

 
 Post subject: OK...I Want to make a small circuit which...
Posted: Sat Jun 03, 2006 11:36 pm 
Smokin em up
Offline
User avatar

Age: 30

Posts: 284

Joined: 22nd May 2006

Ride: EL Charged Falcon

Location: Melbourne
VIC, Australia

OK... An EA with a BBS Manifold... From what i know...They have a Short/Long Runners?? Yes?
In Short runners it make more power down low?
In Long Runners it makes more power high in Rev Range?

(Please tell me if i'm wrong or please Explain in BASIC terms! :D)

The EA has Stock Computer... Manifold needs EL one yer? Ok...Now i wanna know A) How do Shift Lights connect? B) How do u set up the RPM that the Light "Comes on" At? C) Whats the output...The Input of the light... 12V?

What I'm tryin to do is!... I know a little about Electronics, and i have An IDEA on how to make the Manifold Switch On the Stock Computer... IF I know the answers to my questions!

Any Help Would be great... Thanks

Parker

 

_________________

Blown EL..
AU2 motor, White, Pov pack, Copy rims, Running 14psi

Top
 Profile  
 
 
Posted: Sun Jun 04, 2006 12:21 am 
Smokin em up
Offline
User avatar

Age: 30

Posts: 284

Joined: 22nd May 2006

Ride: EL Charged Falcon

Location: Melbourne
VIC, Australia

Ok i have seemed to find the part i need...

Can any1 give me help on Gettin a Pluseing Freq for the Tacho?

Like where and which wire it is...

Thanks

 

_________________

Blown EL..
AU2 motor, White, Pov pack, Copy rims, Running 14psi

Top
 Profile  
 
 
Posted: Sun Jun 04, 2006 12:34 am 
Getting Side Ways
Offline
User avatar

Posts: 1549

Joined: 27th Apr 2005

Gallery: 1 images

Ride: AU Fairmont Ghia

Location: Perth
WA, Australia

Ok just use a frequency switch from jaycar if you havent bought a shiftlight already. The pinouts for the computer are available in the tech docs section or tap into the tacho feed behind the dash or from the negative side of the coil.
Please try to make your posts gramatical.


BBM wont work on a stop EA computer because the fueling and timing are not suited to the BBM. It will ping like mad
Top
 Profile  
 
 
Posted: Sun Jun 04, 2006 12:56 am 
Smokin em up
Offline
User avatar

Age: 30

Posts: 284

Joined: 22nd May 2006

Ride: EL Charged Falcon

Location: Melbourne
VIC, Australia

Do you know why it would Ping? Can yu explain anymore on this?

Thanks

 

_________________

Blown EL..
AU2 motor, White, Pov pack, Copy rims, Running 14psi

Top
 Profile  
 
 
Posted: Sun Jun 04, 2006 1:08 am 
Getting Side Ways
Offline

Age: 31

Posts: 1279

Joined: 5th Apr 2005

Gallery: 2 images

Ride: Toyota Supra RZ

Location: Burwood Nights
VIC, Australia

The fact that the computer will be suited to the one set of runners means its injecting the fuel it thinks it needs and the timing as well.

When they switch to long runners, the fuelling needs and timing is different, but the non BBM ecu won't know this so will keep on doing what it thinks is right..
Top
 Profile  
 
 
 Post subject: Re: OK...I Want to make a small circuit which...
Posted: Sun Jun 04, 2006 1:13 am 
Getting Side Ways
Offline
User avatar

Age: 35

Posts: 1037

Joined: 5th Nov 2004

Gallery: 1 images

Ride: V8 T5 Fairmont & BA XR6T

Location: Sydney
NSW, Australia

Wave_Man wrote:
OK... An EA with a BBS Manifold... From what i know...They have a Short/Long Runners?? Yes?
In Short runners it make more power down low?
In Long Runners it makes more power high in Rev Range?

(Please tell me if i'm wrong or please Explain in BASIC terms! :D)

The EA has Stock Computer... Manifold needs EL one yer? Ok...Now i wanna know A) How do Shift Lights connect? B) How do u set up the RPM that the Light "Comes on" At? C) Whats the output...The Input of the light... 12V?

What I'm tryin to do is!... I know a little about Electronics, and i have An IDEA on how to make the Manifold Switch On the Stock Computer... IF I know the answers to my questions!

Any Help Would be great... Thanks

Parker


Other way round for the runners dude, you need vacuum to the BBM vac solonoid <3000-4000rpm then drop the vac to get the runners to switch to short.

Cheers
Jay

 

_________________

Dima, Mitch & Jay's RPD

Top
 Profile  
 
 
Posted: Sun Jun 04, 2006 1:29 am 
Smokin em up
Offline
User avatar

Age: 30

Posts: 284

Joined: 22nd May 2006

Ride: EL Charged Falcon

Location: Melbourne
VIC, Australia

MMMmmmm Thanks... Lucky i happened to be asking about this... I'm thinking about a EA falcon... It has had a bit of work done to it, one on the things is a BBM-anifold... But it has to be switched manually...

It gets to about 4k but wont go any higher in the Rev Range...I was told that it's simplly not connected and that it has to be wired in... But i knew it had stock Computer, and it was a different Manifold.

But i didn't know it would cause problems...

Thanks

 

_________________

Blown EL..
AU2 motor, White, Pov pack, Copy rims, Running 14psi

Top
 Profile  
 
Display posts from previous:
Sort by  
 Page 1 of 1  [ 7 posts ] 

Who is online

Users browsing this forum: Google Adsense [Bot], steve wardle and 27 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Wed Dec 13, 2017 4:36 pm All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names