Just a quick question. I just fitted my new pacemakers 4499 and obviously the oxy sensor wont reach the harness because the sensor port is further down the manifold. i also have factory LPG which means they have tapped into the sensor wire, for the relay for the change over from gas to petrol. So my question is can i extend the wires of a new o2 sensor to reach the plug in the harness will it affect the ohms readings sent to the computer. Just asking because i had to extend the wires from the o2 sensor going to the relay with the fitment of extractors and its seems to be running a bit slower than b4?

Cheers

Should be OK to extend the wires. With my Pacemakers, I just pulled the plastic cable retainer off the body to add more length to O2 sensor wiring.