|
| jamie22_cole |
|
|||
|
hey guys is it possible to remove the au sump while the engine is still in or do I need to take it fully out to get the sump off?
|
|||
| Top | |
|||
| SWC |
|
||
|
You just put it in.
|
||
| Top | |
||
| Chargd |
|
|||
|
jamie22_cole wrote: hey guys is it possible to remove the au sump while the engine is still in or do I need to take it fully out to get the sump off? not unless you remove the k frame. what do you need it out for?
_________________ 95 Ef Gli, mods : Tickford Head, Tickford ecu, Pacemaker 4499, Venom 100 cpi cat, Redback 2.5" catback, Wade 977b cam, ba xr6 intake and SS inductions, k & n filter & leather seats. 147.5kw @ wheels |
|||
| Top | |
|||
| jamie22_cole |
|
|||
|
yeah I had the sump cut and weld to suit my EL but when the bloke welded it he only welded the outer side of the sump not the inside aswell cause he said it would of been too much hassle drilling and tapping the oil splash baffle so he said to me there no need to weld the inside anyway but I thought it would of giving it a better seal. yeah only reason im asking is that where he welded at the bottom of the sump its leaks a little bit which I not happy about. im so over at fixing my dam car
|
|||
| Top | |
|||
| jamie22_cole |
|
|||
|
can u lift the motor up enough to get it out or ill have to pull the motor right out
|
|||
| Top | |
|||
| Deff |
|
||
|
Can be done but FAR easier to pull the whole thing.
|
||
| Top | |
||
| gggsxr11 |
|
||
|
My mate has just done same process and he has a bar that goes across top of engine and rests on side of engine bay which supports the motor then he dropped k frame and sump,he reckons it is heaps easier to do that way.
|
||
| Top | |
||
| 93EB |
|
|||
Age: 46 Posts: 2484 Joined: 6th Oct 2005 Ride: 93EB Fairmont / BA Falcon XR6T Location: Western Sydney |
gggsxr11 wrote: My mate has just done same process and he has a bar that goes across top of engine and rests on side of engine bay which supports the motor then he dropped k frame and sump,he reckons it is heaps easier to do that way. Probably one of the best ways of doing it. Thats how i would do it also.
_________________ 93 EB II Fairmon8 with 17' EL GT's / Clear indicators / H.I.Ds / Sports exhaust / Lowered 2' / K&N / XR6 ECU. |
|||
| Top | |
|||
| jamie22_cole |
|
|||
|
how think is the bar he use? do u have a pic on what it looks like holding the motor in place?
|
|||
| Top | |
|||
| SWC |
|
||
|
Motor out and make him fix it. Test the thing next time. Use food dye and water.
|
||
| Top | |
||
| ranga83 |
|
||
|
http://www.ebay.com.au/itm/Kincrome-Eng ... 33857516ae
something like this!
_________________ ef futura, pacemakers, 2.5inch catback, k&n panel filter and 3.45 lsd. extractors/cat, ticky head, custom cam grind, t5. now onto cosmetics. |
||
| Top | |
||
| cjh |
|
|||
|
ranga83 wrote: http://www.ebay.com.au/itm/Kincrome-Engine-Support-Bar-500Kg-K12106-/221282375342?pt=AU_Car_Parts_Accessories&hash=item33857516ae something like this! Yep, thats them.....used them heaps of times.
_________________ http://youtu.be/jJTh9F3Vgg0 |
|||
| Top | |
|||
| SWC |
|
||
|
I would reccommend Motor out, as with the AU Engine you have the cross bolts on the sump. A bit different to the E Series motor where all the sump bolts are just through the bottom of the pan.
I am not saying that you couldn't do it but I reckon that it would be easier and safer taking the engine out. |
||
| Top | |
||
| jamie22_cole |
|
|||
|
yeah I will be taken the motor back out probably tomorrow but ill have to wait until the 6th until the bloke returns from his holidays which by then that's when ill be back at work. which now ill have to let the boss know that my car isn't running yet due to the stuff up.
|
|||
| Top | |
|||
| gggsxr11 |
|
||
|
yep that is the bar he has got just not sure if it is king chrome.
|
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: Google Adsense [Bot] and 70 guests |
