|
| Rick_Deckard |
|
|||
|
Hey guys, when I did my head gasket ages back I snapped 2 or 3 bolts into the head when I put the Ford extractors back on (what an experience, lol.)
Anywho, plan to buy these Pacemaker extractors and then getting something to fit the extractors. Thing is, if I get a mechanic or an engine specialist place to install the extractors, will they be able to remove the bolts that snapped and are not sitting in the head? Here are the headers: http://cgi.ebay.com.au/PACEMAKER-HEADERS-FALCON-EA-EB-ED-EF-EL-AU-XG-XH-AU-6_W0QQitemZ140125344493QQihZ004QQcategoryZ50140QQtcZphotoQQcmdZViewItem Cheers lads.
_________________ E39 523i |
|||
| Top | |
|||
| kut&shutkustomz |
|
||
|
most exhaust shops should be able to remove the studs/bolts mate .
have you priced them extractors localy .. dave ..
_________________
|
||
| Top | |
||
| Froudey |
|
||
|
get a bolt extractor kit or just get them goto an exhaust shop you have been a reg at get them to do it less dramas from ya mind
_________________ R.I.P Tobias my son. |
||
| Top | |
||
| Froudey |
|
||
|
get a bolt extractor kit or just get them goto an exhaust shop you have been a reg at get them to do it less dramas from ya mind
_________________ R.I.P Tobias my son. |
||
| Top | |
||
| revhead |
|
||
|
drill into the broken stud and the use an easy out to remove the broken bit of bolt.
_________________ ef fairmont ghia 5.0L
|
||
| Top | |
||
| Andrew J |
|
|||
|
Ill be the first to advise against an easy out! Get someone to do it properly. Its much easier to remove a broken head stud than it is to remove a broken head stud with a stud extractor stuck inside it. How did the bolt break? If you went to take it out, and the bolt twisted itself in two, an easy out wont fix it. chances are it will be corroded inside the head.
_________________ The problem with America is stupidity. I'm not saying there should be a capital punishment for stupidity, but why don't we just take the safety labels off of everything and let the problem solve itself?
Last edited by Andrew J on Sat Sep 15, 2007 11:55 pm, edited 1 time in total. |
|||
| Top | |
|||
| ...Dunkly |
|
||
|
I wish u told me that before i tried to use an easy out to remove a snapped spark-plug, coz now i gotta pull the head off my f**k car
|
||
| Top | |
||
| TwistedEL |
|
|||
|
...Dunkly wrote: I wish u told me that before i tried to use an easy out to remove a snapped spark-plug, coz now i gotta pull the head off my f**k car
I don't belive it? Take a picture, this I gotta see 
|
|||
| Top | |
|||
| efmarek |
|
||
|
if the broken bolts still have some 'stud' protruding out of the head (when exhaust is off, obviously), then just spray that "freeze n snap" stuff onto them and take to them with vice grips.
_________________ LUMPY-6 |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 62 guests |
