|
| RustyEF |
|
||
|
for now i will want to jsut go with a cam and then head work will come 6 months down the track.
_________________ -------EL Fairmont Ghia with CUstome BA XR body kit------- |
||
| Top | |
||
| Steady ED |
|
|||
|
ebfairmont3.9 wrote: arm79 wrote: I had good success with the RPD R6 if you can find a second hand or unfitted one for sale. Idle was stock, so perfect for auto. Judging by your power figure there, I'd say you were on a Shootout Dyno, and with an R6 I'd expect you'd nudge 150-155 on the same dyno. Failing an R6, a Wade 1636 will give good results, probably around the 140ish power mark. And a stock idle. Or if you want to spend some real $$$, a correctly timed Dev 5 cam on its own should give you 165+ rwkw. And a near stock idle to suit the auto. Hmmm 165rwkw on a stock head id be Very surprised. If it makes 130rwkw with those mods on that dyno, it will pull easy 165rwkw with a stock head still 
_________________ ED XR8 Sprint - S-Trim, V500, 249rwkw |
|||
| Top | |
|||
| ebfairmont3.9 |
|
|||
|
lol on that dyno maybe...... these heads flow just under 300Hp at the fly standard. thats 220KW at the motor. Being a little Generous take out drive train loss.
_________________ 1994 ED Fairmont Champaign Gold - AU Series II Intech 4.0L - EL EFI - Thermo Fans - 4.11 LSD - Pacemaker 4480 Into Custom 3" Exhaust - Shift Kit |
|||
| Top | |
|||
| stevegt |
|
||
|
Ive got a stage 3 JMM cam in my Au with a tickford head over size inlet and just the ports cleaned up. Not sure what output KW it has but very sweet. Nice idle heaps off power good fuel economy if not pushed hard. Very please with it
|
||
| Top | |
||
| Grimketel |
|
|||
|
Im tossing up on the dev 3 cam too. people tell me its cheaper to get a wade or whatever. But I am not chasing KW here. Im chasing torque. Whats the BEST CAM for torque?
_________________ enough isn't enough |
|||
| Top | |
|||
| AU1 XR6 |
|
||
Age: 37 Posts: 84 Joined: 21st Jan 2007 Ride: BA MK11 XR8 Location: Sunshine Coast, Kawana |
I got a dev 5 cam, not sure what kw or torque gains i got as ive never had it dyno'd but it made a s**t load of difference it pulls way harder than stock cam.....youll pay the price with jmm gear though its not cheap
_________________ BA MK11 XR8.....6 Speed
|
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 66 guests |
