|
| azzaxr6 |
|
||
|
i have a whining noise coming from the engine first thought it was a tensioner but figured out its coming from the engine not sure wat it is anyone got any ideas
|
||
| Top | |
||
| elandau11extaxi |
|
||
|
have you had the head redone the alignment plate on the timeing chain ie the passenger side of head the one the bolt goes through could be cracked or snapped that happened to a na fairlaine i was looking at recently It also had coroded number 4 cyllinder cracked head but the noise was coming from the timing chain area
Last edited by elandau11extaxi on Thu Nov 25, 2010 1:20 am, edited 1 time in total. |
||
| Top | |
||
| azzaxr6 |
|
||
|
i had the timing chain and all that done not long ago
|
||
| Top | |
||
| elandau11extaxi |
|
||
|
what e series
|
||
| Top | |
||
| azzaxr6 |
|
||
|
ef xr6
|
||
| Top | |
||
| elandau11extaxi |
|
||
|
my el had a whine but it stopped when the teeth sheered of the dizzy drive i took dizzy out It was a cheap china one(i didnt fit it they are metric the motorcraft ones are af\imperial drive i know that yours dosnt have a dizzy but might be worth a look at the teeth on sensor
|
||
| Top | |
||
| azzaxr6 |
|
||
|
hmm this whines fromt he front of it but yer
|
||
| Top | |
||
| elandau11extaxi |
|
||
|
its a s#*t of a job though good luck have you checked the power steering pump?
|
||
| Top | |
||
| Johnson stroker |
|
|||
|
Upper or lower idle tensioner pulleys, I've got it right now as well, but i have 2 new pulleys in the centre consol, now just need to find time to fit them.
Easy way to test, pull your thermos out, with the engine at idle, give the inner bearing on the pulley a quick spray, if it shuts up or changes pitch, problem found. They are pretty common on the serp belt setups. if its still original, be happy you have just 15 years service out of them and replace. drop serp belt, 3 bolts on tensioner itself, then one on each tensioner. pulleys are about $20 - $30 depending on where you go.
_________________
|
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 74 guests |
