Xr6 n/a - xr6 turbo - www.fordmods.com

Home » Forums » Fordmods Tech » 6 Cylinder Workshop

Xr6 n/a - xr6 turbo

Page 1 of 1 [ 8 posts ]

Post New Topic Post Reply

Previous topic Next topic

LARGEdawwg

Post subject: Xr6 n/a - xr6 turbo

Posted: Tue Dec 18, 2012 5:27 pm

Fordmods Newbie

Offline

Age: 37

Posts: 13

Joined: 23rd May 2012

Ride: 03 xr6t ute

Location: Lithgow
NSW, Australia

Hay guys just wondering can you run all xr6 turbo parts on a standed xt motor ?

Top

Profile

TROYMAN

Post subject: Re: Xr6 n/a - xr6 turbo

Posted: Tue Dec 18, 2012 5:58 pm

Moderator

Offline

Posts: 14489

Joined: 7th Nov 2004

Ride: AU XR8

Location: a shit suburb in sydney
NSW, Australia

yes...

Top

Profile

bry40l

Post subject: Re: Xr6 n/a - xr6 turbo

Posted: Tue Dec 18, 2012 6:46 pm

Getting Side Ways

Offline

Age: 32

Posts: 4583

Joined: 30th Aug 2010

Ride: BF XR6,

Location: NEWCASTLE
NSW, Australia

Yes but the compression ratio isnt good,10:1 is the n/a compression ratio

_________________

BF XR6
xr8 snorkel,typhoon lower snorkel,territory intake pipe,20% underdrive kit,pacemaker extractors,high flow cat,xforce exhaust,t56 conversion hd turbo clutch/ flywheel,m86 3.45 lsd,custom tune187.1rwkw as an auto

Top

Profile

FordAUte

Post subject: Re: Xr6 n/a - xr6 turbo

Posted: Tue Dec 18, 2012 6:48 pm

Getting Side Ways

Offline

Age: 32

Posts: 1060

Joined: 5th Jan 2011

Gallery: 3 images

Ride: "08 XR6T Ute

Location: Northside - Brisbane
QLD, Australia

Why is high compression bad for turbo applications?

_________________

"08 XR6T Ute

Top

Profile

TROYMAN

Post subject: Re: Xr6 n/a - xr6 turbo

Posted: Tue Dec 18, 2012 7:31 pm

Moderator

Offline

Posts: 14489

Joined: 7th Nov 2004

Ride: AU XR8

Location: a shit suburb in sydney
NSW, Australia

its not an issue if tuned right..
if my std au engine with 9.6:1 can take 12-18psi for 4 years without failure a b series will be fine providing its tuned well....

i have seen fg egas 10.7:1 engines running e85 with 20+psi of boost..

Top

Profile

bry40l

Post subject: Re: Xr6 n/a - xr6 turbo

Posted: Tue Dec 18, 2012 7:40 pm

Getting Side Ways

Offline

Age: 32

Posts: 4583

Joined: 30th Aug 2010

Ride: BF XR6,

Location: NEWCASTLE
NSW, Australia

But the tunes gotta be good, too much cylinder pressure from a high comp boosted engine can bend rods or do headgasgets.also creats more heat trying to compress so much in such a small area

_________________

Top

Profile

FordAUte

Post subject: Re: Xr6 n/a - xr6 turbo

Posted: Tue Dec 18, 2012 7:52 pm

Getting Side Ways

Offline

Age: 32

Posts: 1060

Joined: 5th Jan 2011

Gallery: 3 images

Ride: "08 XR6T Ute

Location: Northside - Brisbane
QLD, Australia

This is most likely very wrong, but running higher compression would mean getting the same out of lower boost? Or am I way off the mark...

_________________

"08 XR6T Ute

Top

Profile

bry40l

Post subject: Re: Xr6 n/a - xr6 turbo

Posted: Wed Dec 19, 2012 4:59 am

Getting Side Ways

Offline

Age: 32

Posts: 4583

Joined: 30th Aug 2010

Ride: BF XR6,

Location: NEWCASTLE
NSW, Australia

FordAUte wrote:

This is most likely very wrong, but running higher compression would mean getting the same out of lower boost? Or am I way off the mark...

Torque would probably be higher.

_________________

Top

Profile

Post New Topic Reply

Page 1 of 1 [ 8 posts ]

Jump to:

Home » Forums » Fordmods Tech » 6 Cylinder Workshop

Who is online
Users browsing this forum: No registered users and 64 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

It is currently Fri Apr 26, 2024 8:37 pm

All times are UTC + 11 hours