|
| [SXC3A] |
|
|||
|
Hey guys i just bought an EBII lastnight just going over her today and i find the horn isnt working. I press the horn and i hear clicking coming from what looks to be a relay box or somthing along those lines (little black box along the front right quarter panel). i found one of the wires disconected so i reattached it, Anyone got any ideas as to what is going on?
_________________ • F*** McDonalds... I'll make you go Mmmmmm...
|
|||
| Top | |
|||
| bowsaw |
|
|||
|
Mine was same, had t replace relay, get yourself a manual, tells you all this stuff, relay is near battery, had to pull it out to get to it, on a EF anyway.
|
|||
| Top | |
|||
| TwistedEL |
|
|||
|
Double post. Sorry
Last edited by TwistedEL on Sun Jan 22, 2006 12:32 am, edited 1 time in total. |
|||
| Top | |
|||
| TwistedEL |
|
|||
|
To test the horn itself pull out the horn relay (the one that is clicking) and trip out the swtiching contacts with a piece of wire or a coathanger or something. If the horn beeps, replace relay. Otherwise it is probably the horn is disconnected or otherwise faulty.
|
|||
| Top | |
|||
| smally351 |
|
||
|
If the relay is clicking, its probably ok. Its more than likely gunna be the horn itself stuffed. Give the horn a gentle smack with a hammer while someone else is pushing the horn pad, it may start working, but a new horn is the go.
_________________ Real Cars have Chrome Bars |
||
| Top | |
||
| [SXC3A] |
|
|||
|
Thanks for the info guys i found what the problem was. The horn was disconnected to start with, which it looked to be connected when i first glanced at it and secondly there was no foam between the horn plates therefore it was touching all the time making the horn sound non stop when i did connect it.
_________________ • F*** McDonalds... I'll make you go Mmmmmm...
|
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 17 guests |
