|
| spike1508 |
|
|||
|
im looking to replace the speakers in my au falcon, and i've heard that they arn't normal 6inch in front and 6x9 in the rear?
i think that the rears are 5x7. thanks |
|||
| Top | |
|||
| Shum's EL |
|
|||
|
they have 5x7 speakers in the front and rear.. these are a good replacement set -
http://www.clarion.com/au/en/products/2 ... 11558.html they come with a baffle plate 'adapter' so it fits flush and seals in the original 5x7 hole |
|||
| Top | |
|||
| EF_wanabe |
|
||
|
while on the topic of AU's and speakers
i currently want to install some 5.1/4 inch splits in my AU , would it be possible to buy an adaptor to make this happen ? |
||
| Top | |
||
| WazUte |
|
|||
|
the alpine type R, 5 1/4" comes with the 5x7 plate with it, it houses both the speaker and the tweeter. i have these in my AU ute and i highly recommend it...
_________________ AUII Falcoon Ute
|
|||
| Top | |
|||
| EF_wanabe |
|
||
|
ops ,
i mean sorry , ive already got the splits paid $550 for them when i had my civic , so ya not willing to spend more on anther set |
||
| Top | |
||
| Shum's EL |
|
|||
|
EF_wanabe wrote: ops ,
i mean sorry , ive already got the splits paid $550 for them when i had my civic , so ya not willing to spend more on anther set try ebay.. the plates pop up on there fairly often |
|||
| Top | |
|||
| WazUte |
|
|||
|
i talked to my brother who works in JB HIFI car sound section. he suggested asking you local and sussing out a pair from alpine spare parts. not sure about the price.
_________________ AUII Falcoon Ute
|
|||
| Top | |
|||
| EF_wanabe |
|
||
|
Update
went to autobarn today , and they had spacers which where for BA's 7X5 to 6inch , not sure if thats the correct one for AUs ive also got 6inch to 5.25" plastic spacers not sure how it would go using 2 spacers |
||
| Top | |
||
| wazzab4 |
|
||
|
The spacers are really good and can fit a Big 6.5" speaker( Focals ) with out a hassle
|
||
| Top | |
||
| sikford |
|
|||
|
just have to watch the rubber dont hit the grill if you use a thick spacer, i made some 6mm adaptor plates up and have a template somewhere for them,
_________________ THE Fairmont Ghia : 75th Anniversary LE |
|||
| Top | |
|||
| badam |
|
|||
Age: 36 Posts: 61 Joined: 15th Apr 2008 Ride: 99 AU S1 Tickford VCT XR6 Location: Western Sydney |
Those Autobarn spacers should work fine. However, I made 6" speaker spacers for both my old BA and my current AU out of MDF which was only around 4mm thick. I simply traced the factory 5x7" speaker (face down) onto the MDF and cut it out using a jigsaw (i also drilled out the screw holes to line up with the door). Then i drew and cut the hole out to fit my 6" speaker. The MDF spacer screws into the original holes using the original speaker screws, and the 6" speaker is mounted on the MDF. Simple, easy and effective... oh and best of all cheap!
|
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 18 guests |
