|
| punduk |
|
||||
|
Hi Guys,
would you say the tyre in the attached picture is still good condition? According to the tread wear indicators, it seems ok. But what about the part circled in red? Are they also TWI's? Usually they are lower than the rest of the tread but now they are at the same height cheers
|
||||
| Top | |
||||
| Slick |
|
|||
|
Stop of at the local Bob jane Tmart and ask the pros there.
_________________ Mind f**k!!! it works on feeble minded ignorant sheeples... there's plenty of em on this site... some are very intelligent but by god they are so thick!!! Pakrat wrote: You can buy them seppertly
|
|||
| Top | |
|||
| 67RCE |
|
||
|
That appears to be legal, but only just. TWI's are in the middle of the tyre.
_________________ ILL60 - EF XR8, Sunroof, Ticky Kit, 19x8.5/19x11 TE37's, 347, AFr185's, TFS BoxRcustom converter, Hurst Quarterstick, huge billet cam. |
||
| Top | |
||
| EFFalcon |
|
|||
|
you can see the TWI's further back, they're fine.
_________________ FALCN6 - EF GLi Turbo, 20" Rims, Air Bag Suspension, Straight LPG, 225rwkw |
|||
| Top | |
|||
| punduk |
|
||
|
thanks for the replies guys. I wasn't sure if the twi's were just the middle ones. I thought the ones on the sides like the area marked in red were secondary twi's.
cheers all |
||
| Top | |
||
| 87SIlude |
|
||
|
They look ok.
But the wear indicators are in the middle. The minimum tread deapth is 1.5mm ANYWHERE on the tyre, not just on the TDIs So on the outter edges between the pattern if its say 1.6mm or less don't expect to get passed for a road worthy. |
||
| Top | |
||
| 87SIlude |
|
||
|
They look ok.
But the wear indicators are in the middle. The minimum tread deapth is 1.5mm ANYWHERE on the tyre, not just on the TDIs So on the outter edges between the pattern if its say 1.6mm or less don't expect to get passed for a road worthy. |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 31 guests |
