Fordmods Logo

BA Dash swapout 

 

Page 1 of 1 [ 4 posts ] 

 
 Post subject: BA Dash swapout
Posted: Mon May 30, 2016 3:04 am 
Fordmods Newbie
Offline

Posts: 2

Joined: 20th Mar 2016

Ride: 1999 AU Fairmont Sedan

Location: Sydney
NSW, Australia

Hi,

I have a 2005 BA with what I suspect is a cracked board in the ICC as most of the buttons don't work.

I am also now the proud owner of a 2003 Fairmont with dual climate control that I am parting out for my 2 projects.

Question:
Can I do a wholesale swap of the ICC and BEM from the Fairmont to the XT? I want to use the keys from the Fairmont, upgrade the ICC to dual zone climate (from manual) but I can't seem to get my head around the best way to do this and avoid a trip to the dealer.

I am aware that I need to grab the HIM, 2 mixer shafts, LH mirror to make the aircon into Dual CC, but am I missing anything that I need to make the rest work?

Thanks
Top
 Profile  
 
 
 Post subject: Re: BA Dash swapout
Posted: Sun Jun 05, 2016 9:09 pm 
Technical Contributor
Offline

Posts: 477

Joined: 13th Jul 2013

Location: Campbelltown
NSW, Australia

requires the actuator and harness (HIM to actuator) from drivers side as well

can program your original him to suit dual zone but if fairmont one works its already programmed to suit - you may also need Ford to run a HIM selftest to set HIM flap positions when fitted

ICC will require programming to your vehicle by Ford before radio will work- make sure you reset plug at rear of ICC (pull towards you)before fitting ICC

also will need Ford to program 2 keys and run parameter reset if replacing BEM module before vehicle will start- and change lock barrels.(ignition/door/boot to suit or see locksmith) ............

reprogram remotes to suit vehicle -accessory on-demist switch 3 times-and press any remote button
Top
 Profile  
 
 
 Post subject: Re: BA Dash swapout
Posted: Fri Jul 01, 2016 12:20 am 
Smokin em up
Offline
User avatar

Posts: 212

Joined: 7th Nov 2006

Ride: Territory TS TDCi

Location: Melbourne
VIC, Australia

you will also require the passenger door loom and may also need to add a wire from the door loom to the connector under the passenger kick panel for the outside temp sensor.
Top
 Profile  
 
 
 Post subject: Re: BA Dash swapout
Posted: Sun Jul 03, 2016 7:20 pm 
Technical Contributor
Offline

Posts: 477

Joined: 13th Jul 2013

Location: Campbelltown
NSW, Australia

does fairmont have memory seats as LH mirror will be digital not analogue .....
Top
 Profile  
 
Display posts from previous:
Sort by  
 Page 1 of 1  [ 4 posts ] 

Who is online

Users browsing this forum: No registered users and 10 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Mon Jul 24, 2017 3:29 am All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names