I have to replace my heater core.
I have started to remove my dash.

I have taken out;

The stero
The glove box
Centre bit that goes over the transmission has the rear aircon things in it.
The Centre consol
I have dropped the stirring column.
My speedo and instruments.

Do I need to take out the fuse box??
If so how do I do it?
I can't seem to find any clips

Is there anything that I've missed.

Are there any more instructions.
Thank you for reading.

You don't need to pull out the cluster or glovebox etc

Behind the stereo facial you will find 2 bolts, undo these, 1 bolt above kick panel on each side, undo these, drop the colomn, then have look up top of dash - undo 2 screws holding in cover plate that runs across top of dash and when that's removed you will see around 7-8 bolts going across top of dash, undo these

From here the dash will fall on your lap, start disconnecting all the plugs behind dash and remove

Usually takes me around 20-30 mins to get a dash out

Very simple

Thank you !

now for the heater box how do i get that one out ?

Around 6 bolts that are accessed through the engine bay

There actually nuts that you undo off long threaded bolt that is part of the heater box

Have look in engine bay and you'll see what i mean

Cool thank you yeah found 5 of them a 5 minute post has certainly saved lots of time