Hey guys new to the site the other day while I was driving I went to push the traction control button and pushed it to hard and it went into the dash does anyone have a step buy step guide to removing the dash trim to pop it back in?

If it's like mine and is to the left of the steering column and down a bit with the driving light switch directly above it.... those square switch blocks should just pull out.. I swapped the one on the other side with the fuel and boot release on it last week for one that didn't have the white images on them rubbed out.

once you wiggle the switch block out, see if you can't reach the TC switch though the whole, you should be able to plug it back into the square switch block. it will clip in from memory.

Yeah mate it is the same I'll have a go later on and let you know thanks for that I did not even think to try and wiggle that out.