Fordmods Logo

eb gt wheel on nc ghia 

 

Page 1 of 1 [ 7 posts ] 

 
 Post subject: eb gt wheel on nc ghia
Posted: Sat May 10, 2008 3:46 am 
Oompa Loompa
Offline
User avatar

Age: 40

Posts: 37

Joined: 8th May 2008

Ride: NC GHIA V8

Location: sunbury
VIC, Australia

can anyone help . i want to put a eb gt steering wheel in my nc ghia is it a big job?? and do the cruise buttons conect the same way?? :?:

 

_________________

Only Milk & Juice Come In Two Litres

Top
 Profile  
 
 
Posted: Sat May 10, 2008 8:19 am 
Fordmods Addict
Offline
User avatar

Age: 38

Posts: 7958

Joined: 1st Jun 2005

Gallery: 13 images

Ride: Falcon

Power: 237 rwkw

Location: Melbourne
VIC, Australia

Nah not a big job.
Get the horn pad off, disconnect cruise and horn wires, taking note of where they went!!!, undo the big nut in the middle, yank the wheel off, new wheel on, connect wires to horn and cruise buttons, tighten bolt, horn pad back on and done ;)

All connects the same way, as long the GT steering wheel has the boss on the back of it.
Is this a woodgrain one off ebay by any chance?

 

_________________

ED XR8 Sprint - S-Trim, V500, 249rwkw
BF MKII F6 Tornado - 237rwkw

Top
 Profile  
 
 
Posted: Sat May 10, 2008 11:19 am 
Getting Side Ways
Offline
User avatar

Age: 36

Posts: 824

Joined: 10th May 2007

Ride: Xr6 Turbo

Location: Melbourne
VIC, Australia

invest in some steering wheel pullers,it came off in 2 seconds rather then yanking on it.

 

_________________


Previous cars


1995 ef futura - nothing special
2003 xr6 turbo 5 -speed 307rwkw

Top
 Profile  
 
 
Posted: Sat May 10, 2008 11:52 am 
Technical Contributor
Offline

Age: 56

Posts: 3227

Joined: 12th Feb 2007

Gallery: 10 images

Ride: Falcon

Power: 113 rwkw

Location: your mums
NSW, Australia

use a rubber hammer when you take the horn pad off undo the nut up to the top, put your knees under the wheel and put some presure on it hit with rubber hammer and it will pop off its that easy,

even if you use the end of a hammer the wooden handle to hit it and it will come off.

 

_________________

BANNED

Top
 Profile  
 
 
Posted: Sat May 10, 2008 12:58 pm 
Stock as a Rock
Offline

Posts: 125

Joined: 2nd Dec 2007

Location: bellbrook
NSW, Australia

NOTE...LEAVE NUT ON TILL WHEEL COMES LOOSE...what i mean is half undo the nut bang the wheel to loosen it and then take the nut all the way off and remove wheel.
Top
 Profile  
 
 
Posted: Sat May 10, 2008 1:09 pm 
Oompa Loompa
Offline
User avatar

Age: 40

Posts: 37

Joined: 8th May 2008

Ride: NC GHIA V8

Location: sunbury
VIC, Australia

:D cool. thanks guys.

 

_________________

Only Milk & Juice Come In Two Litres

Top
 Profile  
 
 
Posted: Tue May 13, 2008 8:47 pm 
Oompa Loompa
Offline

Age: 53

Posts: 42

Joined: 1st Sep 2007

Ride: EBII Falcon GLi

Location: Rockingham
WA, Australia

Make sure you line up any alignment marks on the inside of the steering wheel with the mark on the steering shaft. This will make sure that the indicators self cancel going around corners, something I found out when I replaced my EBII standard wheel recently with an aftermarket wheel.

 

_________________

EBII GLi sedan 4.0 MPEFI, high series head unit, C**k green, ABS, EB sedan 4.0 MPEFI, red, stock

Top
 Profile  
 
Display posts from previous:
Sort by  
 Page 1 of 1  [ 7 posts ] 

Who is online

Users browsing this forum: No registered users and 24 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Sat Apr 27, 2024 7:22 am All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names