Hey there, I just bought an EF interior off of ebay and I've heard that the seat mounts are different. Whats involved in swapping the seats in?

Is there a guide around?

the rear will fit in as is

the fronts you have to take the rear leg off the rear of the EB seat and weld it to the EF/EL seat rail, then on the front on the outer front rail you need to weld a a small plate to it will cover the bolt hole in the floor and then drill that plate so you can bolt that side down.

i hope that makes sence,

Speak to fordebgt93 pete he did it to his EF/EL ghia seats to fit them into his EB

Hmm, I'm kind of stuck with my BBM switching on the EF motor (using EL dizzy ecu etc) I don't know how the vacuum connects up under the dash from the engine bay... plus the guy who owned it must have ripped out what was going into the engine bay, probably at the same time he cut the aircon lines off at the firewall with a hacksaw.