|
| mitchell g |
|
||
|
hey guys,
been putting my el back together this weekend, I've gone to install the dash this afternoon and I have a vac line on the right hand side of the car which can reach from there to the other side, and I can't find where it should be plugged into? Cheers Mitch |
||
| Top | |
||
| 123esproc |
|
|||
|
If its on the right hand side n reaches as far as the left I'm guessing it goes on the left hand side somewhere, but I'm unsure as to what it connects I've never done a falcon/ fairmont dash
_________________ |
|||
| Top | |
|||
| 123esproc |
|
|||
|
The Climate control box has vacuum hoses connected to it, do u have climate control?
_________________ |
|||
| Top | |
|||
| TimmyA |
|
|||
|
The black coloured vac line on the right hand side of the car loops up over the pedal box and ducks out through the lower A pillar into the right hand mud guard vac reservoir...
At least on the ED it does anyway... Cheers, Tim
_________________ 93 Red ED 5spd Manual Build Thread |
|||
| Top | |
|||
| Mad2 |
|
|||
|
TimmyA wrote: The black coloured vac line on the right hand side of the car loops up over the pedal box and ducks out through the lower A pillar into the right hand mud guard vac reservoir... At least on the ED it does anyway... Cheers, Tim plus EA/EB |
|||
| Top | |
|||
| mitchell g |
|
||
|
cheers guys,i sorted this out it's a couple of the vac lines on the heater box themselves that are proving difficult now
|
||
| Top | |
||
| fezlane |
|
|||
Age: 57 Posts: 434 Joined: 18th Jul 2009 Ride: NL FAIRLANE BA TURBO POWERED Location: ballarat |
Which ones giving ya the s**t or should I say which ones are annoying you.
|
|||
| Top | |
|||
| mitchell g |
|
||
|
fezlane wrote: Which ones giving ya the s**t or should I say which ones are annoying you. red and blue one, reach across to the drivers side of the heater box |
||
| Top | |
||
| fezlane |
|
|||
Age: 57 Posts: 434 Joined: 18th Jul 2009 Ride: NL FAIRLANE BA TURBO POWERED Location: ballarat |
From memory might go to fan speed controlller or somewhere near there
|
|||
| Top | |
|||
| mitchell g |
|
||
|
fezlane wrote: From memory might go to fan speed controlller or somewhere near there it appears everything but my display works on my C/C |
||
| Top | |
||
| fezlane |
|
|||
Age: 57 Posts: 434 Joined: 18th Jul 2009 Ride: NL FAIRLANE BA TURBO POWERED Location: ballarat |
HAve you tried running a diagnostic. I reckon will show numerous probs.
I don't think mine will work as ecu gets a lot of signals from el loom. I am trying to work it all out at the moment but will take time. Best can think of at the moment is to run a on/off switch for aircon compressor and control it manually. |
|||
| Top | |
|||
| mitchell g |
|
||
|
fezlane wrote: HAve you tried running a diagnostic. I reckon will show numerous probs. I don't think mine will work as ecu gets a lot of signals from el loom. I am trying to work it all out at the moment but will take time. Best can think of at the moment is to run a on/off switch for aircon compressor and control it manually. yeah that's the only thing I don't know if it will acturtly cool the car because I haven't gotten the aircon lines joined or gased yet |
||
| Top | |
||
| 123esproc |
|
|||
|
Check fuses?
_________________ |
|||
| Top | |
|||
| fezlane |
|
|||
Age: 57 Posts: 434 Joined: 18th Jul 2009 Ride: NL FAIRLANE BA TURBO POWERED Location: ballarat |
Are you using ba or el compressor if you are using ba compressor have you had air con lines made up yet. No one around here wants to do mine.
|
|||
| Top | |
|||
| mitchell g |
|
||
|
fezlane wrote: Are you using ba or el compressor if you are using ba compressor have you had air con lines made up yet. No one around here wants to do mine. I am using a ba compressor, I've cut the lines off a ba at the wreckers and just going to get them crimped together, if an airrcon comany won't do it, see if a hydraulic company might |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 26 guests |
