Fordmods Logo

how do u program a keypad for a el wagon 

 

Page 1 of 1 [ 9 posts ] 

 
 Post subject: how do u program a keypad for a el wagon
Posted: Thu Nov 18, 2010 7:20 pm 
Stock as a Rock
Offline

Posts: 142

Joined: 26th Mar 2007

Location: bowral
NSW, Australia

how do u program a keypad for a el wagon as the manual says to use the boot switch but there is no switch
Top
 Profile  
 
 
 Post subject: Re: how do u program a keypad for a el wagon
Posted: Thu Nov 18, 2010 8:00 pm 
Technical Contributor
Offline
User avatar

Age: 38

Posts: 4093

Joined: 20th Mar 2005

Gallery: 2 images

Ride: 2.0 Turbo VW

Power: 142 rwkw

Location: Seaford State:
VIC, Australia

Turn Ignition on, press the demister button 3 times within 5 seconds.

The door locks will cycle once.

Wait 2-3 seconds, Press 'any' button on the working remote fob
The doors cycle again.

Wait 2-3 seconds and Press 'any' button on the NEXT remote...
The doors cycle again.

You can do this to a total of 4 remotes, and all existing remotes are deleted.



You would have found this if you searched.

 

_________________

Carefree, we may not be number one, but we're up there.

Top
 Profile  
 
 
 Post subject: Re: how do u program a keypad for a el wagon
Posted: Thu Nov 18, 2010 8:47 pm 
Stock as a Rock
Offline

Posts: 142

Joined: 26th Mar 2007

Location: bowral
NSW, Australia

i tried search and could not find it and i tried the demister button and it dont work any other ideas
Top
 Profile  
 
 
 Post subject: Re: how do u program a keypad for a el wagon
Posted: Fri Feb 03, 2012 9:39 pm 
Parts Gopher
Offline

Age: 25

Posts: 65

Joined: 29th Jan 2012

Ride: 1997 Falcon EL Fairmont Wagon

Location: Melbourne
VIC, Australia

I am having exactly the same problem, I've tried doing the steps exactly as described many many times but pressing the demister button 3 times (on,off,on) never puts the car into learn mode, the locks never cycle.
Top
 Profile  
 
 
 Post subject: Re: how do u program a keypad for a el wagon
Posted: Sat Feb 04, 2012 12:28 am 
Getting Side Ways
Offline
User avatar

Age: 39

Posts: 843

Joined: 20th Feb 2010

Gallery: 2 images

Ride: AU Fairmont Ghia

Location: Elizibif Norf (Local Spelling!!)
SA, Australia

Ignition must be on and ALL accessories turned OFF.
Press demister button 3 times only i.e. press 1 = demister on, press 2 = off, press 3 = on again. If the door locks don't cycle, turn the ignition off and start the process over again.

 

_________________

dc_todd wrote:
Cheap pads squeal like cheap hookers, and you can take that to the bank.


Au Fairmont Ghia
My (Old) 95 EF Wagon

Top
 Profile  
 
 
 Post subject: Re: how do u program a keypad for a el wagon
Posted: Sat Feb 04, 2012 3:20 pm 
Parts Gopher
Offline

Age: 25

Posts: 65

Joined: 29th Jan 2012

Ride: 1997 Falcon EL Fairmont Wagon

Location: Melbourne
VIC, Australia

Esteven8 wrote:
Ignition must be on and ALL accessories turned OFF.
Press demister button 3 times only i.e. press 1 = demister on, press 2 = off, press 3 = on again. If the door locks don't cycle, turn the ignition off and start the process over again.



That's exactly what I've been doing but still no luck.

The strange thing is, It never worked when we bought the car 3 years ago and I recently installed a sound system and tried the smartlock again for the hell of it and it worked, for about 10 minutes and then stopped working again. I'm assuming the only reason it started working again was because I disconnected and re connected the battery.

I'm guessing it's a fault with the BEM unit?
Top
 Profile  
 
 
 Post subject: Re: how do u program a keypad for a el wagon
Posted: Sat Feb 04, 2012 3:42 pm 
Tyre Shredder
Offline
User avatar

Age: 22

Posts: 337

Joined: 30th Apr 2011

Ride: '97 EL Fairmont Ghia

Location: Melbourne
VIC, Australia

hey mate.
Iv done this before and it took me a couple of shots before it eventually did the cycle. I think its because you have to press the demister button at a certain speed before the BEM reealises whats happening. Do it too slow or fast and it will completely ignore it.
Well that worked for me anyway. Give it a shot!

 

_________________

The EL ghia
^^^^^^^^^^

Top
 Profile  
 
 
 Post subject: Re: how do u program a keypad for a el wagon
Posted: Fri Feb 10, 2012 2:34 pm 
Parts Gopher
Offline

Age: 25

Posts: 65

Joined: 29th Jan 2012

Ride: 1997 Falcon EL Fairmont Wagon

Location: Melbourne
VIC, Australia

TheELghia wrote:
hey mate.
Iv done this before and it took me a couple of shots before it eventually did the cycle. I think its because you have to press the demister button at a certain speed before the BEM reealises whats happening. Do it too slow or fast and it will completely ignore it.
Well that worked for me anyway. Give it a shot!


I've tried all sorts of different speeds over the last few days and still no luck :( thanks for the tip though mate.
Top
 Profile  
 
 
 Post subject: Re: how do u program a keypad for a el wagon
Posted: Mon Aug 06, 2012 5:13 pm 
Fordmods Newbie
Offline

Age: 32

Posts: 1

Joined: 6th Aug 2012

Ride: 97' El Ford Falcon

Location: Armadale, Perth
WA, Australia

Heya how ya going took me abit just make sure when you press the demister button that the light comes on the front dash, my switch waz abit sticky and wouldnt turn on at first felt like it was working but the light wasnt coming on. Do that 3 times On, Off, On with the doors closed in Acc and nothing running ie Radio, Cigarette-Chargers ect... Good Luck Also I did it pretty slow and make sure ya battery in ya remote iz good :D
Top
 Profile  
 
Display posts from previous:
Sort by  
 Page 1 of 1  [ 9 posts ] 

Who is online

Users browsing this forum: No registered users and 8 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Mon Dec 18, 2017 9:02 am All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names