|
| BOSXR8 |
|
|||
|
can some one please tell me how to remove the centre the centre pad off a momo steering wheel fitted to an eb/d? i cant seem to figure it out. i bought an eb xr6 last week and the steering wheel does a grinding noise when turning, trying to take the wheel off to figure out what the noise is.
thanks guys
_________________ EB SXR6. ED XR8 Sprint. |
|||
| Top | |
|||
| revcore |
|
|||
|
Any screws on the back perhaps?
_________________
|
|||
| Top | |
|||
| Froudey |
|
||
|
BOSXR8 wrote: can some one please tell me how to remove the centre the centre pad off a momo steering wheel fitted to an eb/d? i cant seem to figure it out. i bought an eb xr6 last week and the steering wheel does a grinding noise when turning, trying to take the wheel off to figure out what the noise is. thanks guys um just pull it off, it wraps behind abit to hold it into place.
_________________ R.I.P Tobias my son. |
||
| Top | |
||
| 67RCE |
|
||
|
The horn pad lifts off, it's a tight fit but it comes off
_________________ ILL60 - EF XR8, Sunroof, Ticky Kit, 19x8.5/19x11 TE37's, 347, AFr185's, TFS BoxRcustom converter, Hurst Quarterstick, huge billet cam. |
||
| Top | |
||
| BOSXR8 |
|
|||
|
67RCE wrote: The horn pad lifts off, it's a tight fit but it comes off thanks guys, i didnt want to damage it because the top and bottom seemed like it would come off but the sides seem to wrap around a fair bit... any idea what the noise could be from? sounds like the plastic urrounding the column may be rubbing on the steering shaft
_________________ EB SXR6. ED XR8 Sprint. |
|||
| Top | |
|||
| 67RCE |
|
||
|
The sides aren't connected to anything, only the top and bottom, I'll find some pics I have of my old one so you can see.
_________________ ILL60 - EF XR8, Sunroof, Ticky Kit, 19x8.5/19x11 TE37's, 347, AFr185's, TFS BoxRcustom converter, Hurst Quarterstick, huge billet cam. |
||
| Top | |
||
| Sturmovik |
|
|||
|
The grinding will be the clock spring contacts worn out.
_________________ 1993 ED XR6 5speed Polynesian Green. Project car. |
|||
| Top | |
|||
| XRfairmont67 |
|
|||
|
Sturmovik wrote: The grinding will be the clock spring contacts worn out. arent clock springs for the airbag contacts? eb/ed dont have airbags |
|||
| Top | |
|||
| 67RCE |
|
||
|
 That should help you mate.
_________________ ILL60 - EF XR8, Sunroof, Ticky Kit, 19x8.5/19x11 TE37's, 347, AFr185's, TFS BoxRcustom converter, Hurst Quarterstick, huge billet cam. |
||
| Top | |
||
| jaysway |
|
|||
|
Sturmovik wrote: The grinding will be the clock spring contacts worn out. yep, i just cleaned them then applied i tiny bit of grease, no more noise |
|||
| Top | |
|||
| Papa Smurf |
|
||
|
[humour]So you fixed it BOSXR8? I was going to say, you just bring that naughty steering wheel to Papa Smurf and I will get that pesky thing off and give you one that is easier to take off, I will even get rid of that naughty wheel for ya?
|
||
| Top | |
||
| Ballast |
|
|||
|
elf100capri wrote: arent clock springs for the airbag contacts? eb/ed dont have airbags With older cars, you can get away with 1 wire running up the centre of the steering column without any issue. The clock spring will allow for items that require more than 1 wire running to the steering wheel to turn with the steering wheel without pulling the wires loose. On the EB/ED, it would be wiring for cruise control. On newer cars, it can cover items like bluetooth switches, audio controls, headlight switches, steering wheel shift buttons etc.
_________________ Remember kids, the more pages of crap in your build thread, the bigger your e-penis is |
|||
| Top | |
|||
| BOSXR8 |
|
|||
|
Papa Smurf wrote: [humour]So you fixed it BOSXR8? I was going to say, you just bring that naughty steering wheel to Papa Smurf and I will get that pesky thing off and give you one that is easier to take off, I will even get rid of that naughty wheel for ya? lolll im sure i will figure it out this weekend!!! the thing is i didnt want to pull the pad off with too much force as i know how much these are worth and didnt want to damage it. so in that pik, the two c haped pads on the side are not part of the horn pad? hmmm def need to look at it again... im thinking those two brass contact things are what are making the noise... is that what your referring to?? its been a while since i have been on this site, i almost forgot how awesome you guys are! now that the blue oval is back im sure to be on a lot more! thanks so much for your help.
_________________ EB SXR6. ED XR8 Sprint. |
|||
| Top | |
|||
| 67RCE |
|
||
|
Those C shaped pads are part of the horn pad. There is about 3-5 mm of the pad that covers the back of the spokes all around
_________________ ILL60 - EF XR8, Sunroof, Ticky Kit, 19x8.5/19x11 TE37's, 347, AFr185's, TFS BoxRcustom converter, Hurst Quarterstick, huge billet cam. |
||
| Top | |
||
| BOSXR8 |
|
|||
|
the horn pad is deceiving! got it off, re greased the back of the wheel and cleand it up and no more noise! thanks peoples!
_________________ EB SXR6. ED XR8 Sprint. |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 40 guests |
