|
buzzdog |
|
||
|
G'day all,
My left hand dash vent in my 04 BA XR6 Turbo has develped a crack; I want to remove it and see if I can repair the crack but have no idea on how to remove, let alone, where to start? Is there a member out there who may be able to lend their expertise on how to get at the dash vent, remove and then repair it? The crack is not that large, only an inch or so at its longest; it's more unsightly than anything else. Thanks in advance Cheers Buzz
_________________ Cheers
|
||
Top | |
TimmyA |
|
|||
|
I changed mine to the chrome vents and it wasn't that hard from memory...
I'd start by poping the end panel out of the dash and working from there... This is the small panel that the door closes against... Possibly after this comes off the dash speer comes off and then you can see the two screws holding the vent in? Can't quite remember... There is two screws holding it in and it wasn't real hard... Cheers, Tim
_________________ 93 Red ED 5spd Manual Build Thread |
|||
Top | |
buzzdog |
|
||
|
TimmyA wrote: I changed mine to the chrome vents and it wasn't that hard from memory... I'd start by poping the end panel out of the dash and working from there... This is the small panel that the door closes against... Possibly after this comes off the dash speer comes off and then you can see the two screws holding the vent in? Can't quite remember... There is two screws holding it in and it wasn't real hard... Cheers, Tim G'day Tim, Just gave your method a crack and it worked a treat; it was acutally really easy once you got an idea of how it all went together, almost feel stupid of having asked the question in the first place ![]() Thanks again for your help. Cheers Buzz
_________________ Cheers
|
||
Top | |
TimmyA |
|
|||
|
That's no worries mate... Glad to have helped...
There's no such thing as a stupid question! Cheers, Tim
_________________ 93 Red ED 5spd Manual Build Thread |
|||
Top | |
TedW |
|
||
|
buzzdog wrote: TimmyA wrote: I changed mine to the chrome vents and it wasn't that hard from memory... I'd start by poping the end panel out of the dash and working from there... This is the small panel that the door closes against... Possibly after this comes off the dash speer comes off and then you can see the two screws holding the vent in? Can't quite remember... There is two screws holding it in and it wasn't real hard... Cheers, Tim G'day Tim, Just gave your method a crack and it worked a treat; it was acutally really easy once you got an idea of how it all went together, almost feel stupid of having asked the question in the first place ![]() Thanks again for your help. Cheers Buzz that's what the site is about |
||
Top | |
Who is online |
---|
Users browsing this forum: No registered users and 14 guests |