|
| mixxxr |
|
||
|
Hi im looking to paint my icc face on my ba mk II xr just wondering if anyone has pull there icc out or know of someone who has what info i should know or if it is worth it. I know that you have to keep them upright but whats holding me back is that i was told if you pull it out the car is useless and that you have to get ford to reprogram the whole thing for it to work again. Can anyone help me
Thanks Mixxxr
_________________ Ef XR8 King springs ultra lows ss inductions cold air intake 2.5" sports exhaust 18" x 8" anz mahems blue cluster face alpine stereo bmc air filter stainless intake pipe
|
||
| Top | |
||
| Mitch_ |
|
|||
Posts: 6168 Joined: 5th Nov 2004 |
i think if you remove it and put it back in with the battery out you should be sweet, if you replace it tho your screwed until ford reprograms it. i belive there is a mob that sells glossy black ones, so if you can track them down i'm sure they'd have instructions on how to fit there fascia.
_________________
|
|||
| Top | |
|||
| xpression |
|
|||
|
as long as u refit the same icc u pull out u'll be fine
|
|||
| Top | |
|||
| mixxxr |
|
||
|
Thanks I will give it ago i was at the fpv open day yesterday (sunday) and i ask a few people
Mixxxr
_________________ Ef XR8 King springs ultra lows ss inductions cold air intake 2.5" sports exhaust 18" x 8" anz mahems blue cluster face alpine stereo bmc air filter stainless intake pipe
|
||
| Top | |
||
| punktured |
|
|||
|
if you want one already done (black gloss or silver) check out these guys, www.asllogistics.com
i found the hardest thing taking the unit out is the stupid plugs! you wont have any problems taking it out and putting it back in and im pretty sure that turning it upside down is only a problem for the 6 stacker. but be on the safe side and try not to do it just incase |
|||
| Top | |
|||
| mixxxr |
|
||
|
How did you get the pulgs undone coz when i first tryed it only came out about 30mm
_________________ Ef XR8 King springs ultra lows ss inductions cold air intake 2.5" sports exhaust 18" x 8" anz mahems blue cluster face alpine stereo bmc air filter stainless intake pipe
|
||
| Top | |
||
| punktured |
|
|||
|
i got about as far as you then gave up! i just couldnt get in there to rip em out
 i wanna change the leds in mine and paint the fascia (once i decide on a colour). so if there's some trick on getting the plugs out let us know
|
|||
| Top | |
|||
| mixxxr |
|
||
|
I will have another go this weekend i will let you know how i go.
_________________ Ef XR8 King springs ultra lows ss inductions cold air intake 2.5" sports exhaust 18" x 8" anz mahems blue cluster face alpine stereo bmc air filter stainless intake pipe
|
||
| Top | |
||
| Nicko |
|
|||
|
punktured wrote: i got about as far as you then gave up! i just couldnt get in there to rip em out
i wanna change the leds in mine and paint the fascia (once i decide on a colour). so if there's some trick on getting the plugs out let us knowThe LED'S in there are SMD so i hope your a good smd solderer!
_________________ Nicko |
|||
| Top | |
|||
| xpression |
|
|||
|
the plugs on the BEM have the release clips all in different spots. One of them has it closer to the nose of the plug then the others too
|
|||
| Top | |
|||
| punktured |
|
|||
|
Neo_nick - I've noticed that. I'm going to try it on my old cluster first so i can get the hang of it. It doesnt look too hard.
xpression - I know the release clips you're talking about, i just couldn't get in there to press them in properly so i cave up 
|
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 33 guests |
