|
| sunbury23 |
|
|||
Age: 34 Posts: 354 Joined: 11th Dec 2007 Ride: ED Futura Classic & EF Futura SW Location: Scummers |
If ya read my other post i had problems with my smart lock, Well i know it's the BEM Because when the car dont start i hold the key in in ON Pos and hit the Panel above my left knee and the car starts. So i got a Replacement BEM for $10 and i wanna stick it in. so what i want to know is how to i make if relearn the ignition barrel codes any any other stuff like that.
thanks |
|||
| Top | |
|||
| Krytox |
|
|||
|
1: Remove old B.E.M
2: Install new B.E.M 3: Wind window down. 4: Ignition on (second click) smartlock jewel will flash fast. 5: Leave car shut door. 6: Wait 30-45mins EF, 60mins EL. 7: Door locks will cycle. 8: Smartlock light will be steady. 9: Crank (DO NOT turn off then crank). Run for a few minutes to recharge the 60mins of ignition being on. Turn off Reprogram remotes Job Done.
_________________ Carefree, we may not be number one, but we're up there. |
|||
| Top | |
|||
| sunbury23 |
|
|||
Age: 34 Posts: 354 Joined: 11th Dec 2007 Ride: ED Futura Classic & EF Futura SW Location: Scummers |
Krytox wrote: 1: Remove old B.E.M
2: Install new B.E.M 3: Wind window down. 4: Ignition on (second click) smartlock jewel will flash fast. 5: Leave car shut door. 6: Wait 30-45mins EF, 60mins EL. 7: Door locks will cycle. 8: Smartlock light will be steady. 9: Crank (DO NOT turn off then crank). Run for a few minutes to recharge the 60mins of ignition being on. Turn off Reprogram remotes Job Done. what will happen if i turn the car off on step 9? |
|||
| Top | |
|||
| Krytox |
|
|||
|
sunbury23 wrote: what will happen if i turn the car off on step 9?
You'll be going back to Step '4' and waist another 40 or so minutes!
_________________ Carefree, we may not be number one, but we're up there. |
|||
| Top | |
|||
| sunbury23 |
|
|||
Age: 34 Posts: 354 Joined: 11th Dec 2007 Ride: ED Futura Classic & EF Futura SW Location: Scummers |
thanks, i'll have to change it over when i have the petrol to run the car for 40mins and enough to get more.
thanks |
|||
| Top | |
|||
| Krytox |
|
|||
|
You don't run the car (you won't be able to anyways), you simply turn on the ignition.
_________________ Carefree, we may not be number one, but we're up there. |
|||
| Top | |
|||
| sunbury23 |
|
|||
Age: 34 Posts: 354 Joined: 11th Dec 2007 Ride: ED Futura Classic & EF Futura SW Location: Scummers |
yeah i know, when it's on accessories if drains the battery... Not the patrol tank. Not thinking straight do day. And what is the chance my battery will die while running it while it learns the new codes?
|
|||
| Top | |
|||
| kovac |
|
||
|
Krytox wrote: 1: Remove old B.E.M
2: Install new B.E.M 3: Wind window down. 4: Ignition on (second click) smartlock jewel will flash fast. 5: Leave car shut door. 6: Wait 30-45mins EF, 60mins EL. 7: Door locks will cycle. 8: Smartlock light will be steady. 9: Crank (DO NOT turn off then crank). Run for a few minutes to recharge the 60mins of ignition being on. Turn off Reprogram remotes Job Done. when i replaced my bem on my el i had to wait till about an hour and after that the light was still going pretty quick i turned it off and tried to start (and it did) and that was the 2nd 1 i had to do it to
_________________ there is only 2 rules in driving go hard or go home |
||
| Top | |
||
| sunbury23 |
|
|||
Age: 34 Posts: 354 Joined: 11th Dec 2007 Ride: ED Futura Classic & EF Futura SW Location: Scummers |
kovac wrote: Krytox wrote: 1: Remove old B.E.M 2: Install new B.E.M 3: Wind window down. 4: Ignition on (second click) smartlock jewel will flash fast. 5: Leave car shut door. 6: Wait 30-45mins EF, 60mins EL. 7: Door locks will cycle. 8: Smartlock light will be steady. 9: Crank (DO NOT turn off then crank). Run for a few minutes to recharge the 60mins of ignition being on. Turn off Reprogram remotes Job Done. when i replaced my bem on my el i had to wait till about an hour and after that the light was still going pretty quick i turned it off and tried to start (and it did) and that was the 2nd 1 i had to do it to Only Took my EF about 25mins, all done and working 
|
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 27 guests |
