|
| fairmont 1 |
|
||
|
hi
fitted a new smartlock module to the ed fairmont and the learning instructions seemed to have worked (put key in on until locks cycle then turn to start well as the fairmonts got no engine just held the key in the start and let it go back to on. but when you push the boot button 3 times it doesnt go into learn mode for programming remotes . also why would the smartlock light flash when the key is in the on position?? Need a new ign switch?? Plug the ecu back in?? to compete the smartlock |
||
| Top | |
||
| Jim5.0 |
|
||
|
Push the rear demister switch 3 times not the boot button. As for the light being on with the key in the ignition I can't help with that.
|
||
| Top | |
||
| fairmont 1 |
|
||
|
its for a ed your supposed to push boot button 3 times but doesnt work how long do you leave ign on for to reset it left it for a hr and locks didnt go up. are you supposed to have any accs going or not
|
||
| Top | |
||
| TROYMAN |
|
||
|
yes, press the boot button 3 times to set the remotes in eb/ed..
otherwise to teach the smartlock to recognise the ignition you need to have all accesories of with the door shut and ignition on for aproxx 20-30 mins, best to have your window down incase of malfunction.. and its kind of pointless trying to set the smartlock up properly due to the car having no engine?? 
|
||
| Top | |
||
| Jim5.0 |
|
||
|
How do you press the boot button if you have a wagon? Due to that I still say it's the rear demister button. Give it a try you have nothing to lose.
|
||
| Top | |
||
| TROYMAN |
|
||
|
well a wagon is the same, it uses the same curcuit at the boot release to unlock the wagon door.. same as in sedan, ive done it to mine with no problems..
to the op, when you train the remote the ignition needs to be on accessories |
||
| Top | |
||
| fairmont 1 |
|
||
|
why wont the smartlock go into learn mode to program the remotes even though it programs fine
|
||
| Top | |
||
| TimmyA |
|
|||
|
I thought it was the demister button on early e series too?
I thought it was boot button on the later stuff? Cheers, Tim
_________________ 93 Red ED 5spd Manual Build Thread |
|||
| Top | |
|||
| fairmont 1 |
|
||
|
in a ed put the key on accs and push the boot button 3 times in 5 seconds well it wont work even though the box programs in fine whys that
|
||
| Top | |
||
| TimmyA |
|
|||
|
have you tried the demister button as opposed to the boot button?
_________________ 93 Red ED 5spd Manual Build Thread |
|||
| Top | |
|||
| fairmont 1 |
|
||
|
yes demister and boot button but wont go into learn mode even though the box programs fine and the smartlock light dissappears when you put the key in on.
sometimes the light will flash when its on accs |
||
| Top | |
||
| TimmyA |
|
|||
|
so you are in the car with all doors closed properly...
key on accy press the demister/boot button three times in rapid succession and doors will not lock? The barrel pairing and the remote pairing are two completely separate things... You can do one of either or both... They are not interconnected... Just because one works doesn't mean the other will... Usually when smartlock jewel blinks it means its having issues talking to the barrel... Be it a barrel issue or smartlock module issue... Cheers...
_________________ 93 Red ED 5spd Manual Build Thread |
|||
| Top | |
|||
| fairmont 1 |
|
||
|
ok so why wont it go in learn mode
when you put the key in on the light dissapears and doesnt flash |
||
| Top | |
||
| TimmyA |
|
|||
|
you tried both "accy" and "on" barrel positions? Though I'm fairly sure its accy...
If no go I'd be trying the module in a different car... Maybe it has failed... ???
_________________ 93 Red ED 5spd Manual Build Thread |
|||
| Top | |
|||
| fairmont 1 |
|
||
|
what usually goes wrong with the modules relays? circuit boards?
|
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 16 guests |
